MAX809中文資料Voltage Supervisor, Very Low Supply Current, 3-Pin Microprocessor, Reset Monitor數據手冊O(shè)NSEMI規格書

描述 Description

The MAX809/NCV809 and MAX810 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 10 µsec of VCC falling through the reset voltage threshold. Reset is maintained active for a timeout period which is trimmed by factory after VCC rises above the reset threshold. The MAX810 has an active-high RESET output while the MAX809 has an active-low RESETbar output. Both devices are available in a SOT-23 and SC-70 packages. The MAX809/810 are optimized to reject fast transient glitches on The VCCline. Low supply current of 0.5 µA (VCC = 3.3 V) makes these devices suitable for battery powered applications.

特性 Features

? NCV Version for Automotive
? AEC-Q100 Qualified
? Precision VCC Monitor for 1.5 V, 1.8V, 2.5 V, 3.0 V, 3.3 V and 5.0 V supplies
? Precision Monitoring Voltages from 1.2 V to 4.9 V Available in 100 mV Steps
? Four Guaranteed Minimum RESET Output Duration(1ms, 20ms, 100ms and 140ms)
? RESET Output Guaranteed to VCC = 1.0 V
? Low 1.0 µA Supply Current
? VCC Transient Immunity
? Small SOT-23 and SC-70 Package
? No External Components
? Wide Operating Temperature: -40°C to 105°C

應用 Application

? Computers
? Embedded Systems
? Battery Powered Equipment
? Critical Microprocessor Power Supply Monitoring
? Body Electronic
? Braking
? Infotainment
? Instrument Cluster
? Nagivator
? Occupant Comfort
? Occupant Protection
? Powertrain

簡介

MAX809屬于集成電路（IC）的監控器。由ONSEMI制造生產的MAX809監控器PMIC 監控器用于監視和/或控制電路中的電壓軌，能夠連接微控制器以維持一定的功率限值。監控器類型包括電池備用電路、監控器、多電壓監控器、電源監控器、穩壓器/監控器、復位計時器、定序器、簡單復位/上電復位、智能開/關控制器、系統管理器、電壓檢測器和看門狗電路。