5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

5V, Low-Power, Parallel-Input, Voltage-Output, 12-Bit DAC

General Description The MAX530 is a low-power, 12-bit, voltage-output digital-to-analog converter (DAC) that uses single +5V or dual ±5V supplies. This device has an on-chip voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single +5V supply, making it idea

文件：140.89 Kbytes 頁數：16 Pages

MAXIM

美信

10位、電壓輸出DAC，8引腳μMAX封裝

MAX5304集成了低功耗、電壓輸出、10位數模轉換器(DAC)和精密輸出放大器，采用8引腳μMAX封裝。它采用+5V單電源供電，電源電流消耗小于280μA。\n\n 輸出放大器的反相輸入可供用戶實現特定增益配置、遠程檢測和高輸出電流能力。因此，MAX5304非常適合用于包括工業過程控制的各種應用。其他特性包括軟件關斷和上電復位。\n\n 串行接口與SPI?/QSPI?/MICROWIRE?兼容。此DAC有一個雙緩沖輸入，采用一個輸入寄存器后跟一個DAC寄存器的組織形式。16位串行字將數據加載到輸入寄存器中。DAC寄存器可以獨立更新，也可以與輸入寄存器同時更新。所有邏輯輸入 ? 具有可配置輸出放大器的10位DAC\n\n? +5V單電源供電\n\n? 低電源電流\n? 正常工作模式為0.28mA\n\n? 關斷模式為2μA\n\n\n\n\n? 采用8引腳μMAX封裝\n\n? 上電復位可將DAC輸出清零\n\n? 與SPI/QSPI/MICROWIRE兼容\n\n? 用于直接光耦合器接口的施密特觸發器數字輸入;

ADI

亞德諾

低功耗、低干擾、八通道、12位、電壓輸出DAC，串行接口

MAX5306/MAX5307是12位、8通道、低功耗、電壓輸出的數模轉換器(DAC)，采用節省空間的16引腳TSSOP封裝。+2.7V至+5.5V的寬電源電壓范圍、每通道小于215μA (最大)的電源電流等特性，更適合于低功耗和低電壓應用。MAX5306/MAX5307的2nV/s低瞬變能量使它們尤其適合于數字控制快速響應的閉環系統。\n\n MAX5306的數字輸出(DOUT)可用于菊花鏈接多個器件。MAX5307有一個硬件復位輸入端(/CLR)，能夠復位所有寄存器和DAC為零。MAX5306/MAX5307具有軟件關斷功能，將電源電流降低至1μA。MAX5306/MAX5307 ? 8通道高集成度的12位DAC，采用16引腳TSSOP (6.4mm x 5mm)封裝\n? 極低的突變能量< 2nV/s \n? 極低的總電源電流：\n? 在VREF = VDD = +5.5V時，1.7mA (最大)\n\n\n? +2.7V至+5.5V寬范圍單電源供電\n? 5μs的快速建立時間\n? 軟件選擇的關斷模式< 1μA \n? 15MHz、兼容SPI, QSPI和MICROWIRE的3線串行接口\n? 上電復位清零;

ADI

亞德諾