Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

General Description The MAX410/MAX412/MAX414 single/dual/quad op amps set a new standard for noise performance in high-speed, low-voltage systems. Input voltage-noise density is guaranteed to be less than 2.4nV/√Hz at 1kHz. A unique design not only combines low noise with ±5V operation, but also

文件：461.17 Kbytes 頁數：12 Pages

MAXIM

美信

Single/Dual/Quad, 28MHz, Low-Noise, Low-Voltage, Precision Op Amps

文件：325.27 Kbytes 頁數：16 Pages

MAXIM

美信

單通道/雙通道/四通道、28MHz、低噪聲、低電壓、精密運算放大器

MAX410/MAX412/MAX414單通道/雙通道/四通道運算放大器為高速、低壓系統的噪聲性能設立了新標準。在1kHz時，輸入電壓噪聲密度確保小于2.4nV/root-Hz。專門的設計不僅噪聲低、支持±5V工作，而且每個放大器的電源電流消耗僅為2.5mA。使用±5V電源供電時，輸出電壓擺幅為7.3VP-P，可確保2kΩ下的低電壓工作。MAX410/MAX412/MAX414還可以在±2.4V和±5V之間的電源電壓下工作，以實現更大的電源靈活性。\n\n 單位增益穩定性、28MHz帶寬和4.5V/μs壓擺率可確保在各種寬帶和測量應用中提供低噪聲性能。MAX410/MAX412/MA ? 電壓噪聲：1kHz時為2.4nV/root-Hz（最大值）\n\n? 2.5mA電源電流（每個放大器）\n\n? 低電源電壓供電：±2.4V至±5V\n\n? 單位增益帶寬：28MHz\n\n? 壓擺率：4.5V/μs\n\n? 失調電壓：250μV（最大值，MAX410/MAX412）\n\n? 電壓增益：115dB（最小值）\n\n? 采用超小型TDFN封裝;

ADI

亞德諾

330MHz, 4x1 Precision Video Multiplexer

General Description The MAX4141 is a wideband 330MHz, 700V/μs 4x1 multiplexer optimized for high-definition, broadcast quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and enable and swit

文件：69.89 Kbytes 頁數：8 Pages

MAXIM

美信

330MHz, 4x1 Precision Video Multiplexer

General Description The MAX4141 is a wideband 330MHz, 700V/μs 4x1 multiplexer optimized for high-definition, broadcast quality, composite (HDTV, NTSC, PAL, SECAM) video switching arrays. The device includes four open-loop buffer amplifiers with a 0.1dB gain flatness of 150MHz, and enable and swit

文件：69.89 Kbytes 頁數：8 Pages

MAXIM

美信

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ? 250MHz -3dB

文件：120.18 Kbytes 頁數：12 Pages

MAXIM

美信

250MHz, Low-Power, High-Output-Current, Differential Line Driver

General Description The MAX4142 differential line driver combines high-speed performance with fully symmetrical differential inputs and outputs. With an internally set +2V/V closed-loop gain, the MAX4142 is ideal for driving back-terminated cables and transmission lines. Features ? 250MHz -3dB

文件：120.18 Kbytes 頁數：12 Pages

MAXIM

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 頁數：16 Pages

MAXIM

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 頁數：16 Pages

MAXIM

美信

High-Speed, Low-Distortion, Differential Line Receivers

General Description The MAX4144/MAX4145/MAX4146 differential line receivers offer unparalleled high-speed, low-distortion performance. Using a three op-amp instrumentation amplifier architecture, these ICs have fully symmetrical differential inputs and a single-ended output. They operate from ±5V

文件：212.1 Kbytes 頁數：16 Pages

MAXIM

美信