Signal-Line Circuit Protectors

General Description The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply voltages. Features ? ±40V Overvoltage Protection ? O

文件：103.08 Kbytes 頁數：12 Pages

MAXIM

美信

信號通道電路保護器、三個獨立的保護器

MAX366和MAX367是多路、雙端電路保護器。每個雙端器件都與信號線串聯放置，可保護敏感電路元件，使其免受接近或超過正常電源電壓的電壓影響。這些器件用于敏感電路連接到外界的接口處，并且在上電、斷電或故障條件下可能會遇到破壞性電壓（超過電源軌高達35V）。\n\n MAX366和MAX367各包含三個和八個獨立的保護器。它們可以使用單極（4.5V至36V）或雙極（±2.25V至±18V）電源保護模擬信號。每個保護器均為對稱結構。輸入和輸出端子可以自由互換。\n\n 這些器件均為壓敏MOSFET晶體管陣列，加電時常開，斷電時通常為開路。使用±10V電源時，在+25°C下的導 ? ±40V過壓保護\n\n? 斷電時信號路徑開路\n\n? 通電時信號路徑電阻為100Ω\n\n? +25°C時的最大路徑漏電流：1nA\n\n? 最大電源電壓額定值：44V\n\n? 自動保護；無編程或控制;

ADI

亞德諾

Analog CATV Transimpedance Amplifier

General Description The MAX3660 high-linearity analog RF transimpedance amplifier (TIA) is intended for passive optical network (PON) video receiver applications. With 66dBΩ maximum variable gain and integrated uptilt, the MAX3660 provides 23dBmV/channel ±1dB at 870MHz (19dBmV/channel at 47MHz)

文件：250.99 Kbytes 頁數：9 Pages

MAXIM

美信

Analog CATV Transimpedance Amplifier

General Description The MAX3660 high-linearity analog RF transimpedance amplifier (TIA) is intended for passive optical network (PON) video receiver applications. With 66dBΩ maximum variable gain and integrated uptilt, the MAX3660 provides 23dBmV/channel ±1dB at 870MHz (19dBmV/channel at 47MHz)

文件：250.99 Kbytes 頁數：9 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 頁數：12 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 頁數：12 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 頁數：12 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides a true differential ou

文件：236.65 Kbytes 頁數：12 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides

文件：584.52 Kbytes 頁數：12 Pages

MAXIM

美信

622Mbps, Ultra-Low-Power, 3.3V Transimpedance Preamplifier for SDH/SONET

General Description The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable differential voltage. A DC cancellation circuit provides

文件：584.52 Kbytes 頁數：12 Pages

MAXIM

美信