2.5V, 1uA, 460kbps, RS-232-Compatible Transceivers

General Description The MAX3316–MAX3319 transceivers have a proprietary low-dropout transmitter output stage enabling RS-232-compatible performance from +2.25V to +3.0V with a dual-charge pump. These devices require only four 0.1μF capacitors, and are guaranteed to operate at data rates up to 460

文件：214.01 Kbytes 頁數：15 Pages

MAXIM

美信

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES ? ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) ? 300-μA Operating Supply Current ? 1-μA Low-Power Standby (With Receivers Active) Mode ? Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 頁數：22 Pages

TI

德州儀器

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES ? ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) ? 300-μA Operating Supply Current ? 1-μA Low-Power Standby (With Receivers Active) Mode ? Designed to Transmit at a Data Rate of

文件：516.049 Kbytes 頁數：22 Pages

TI

德州儀器

TRANSCEIVER WITH ESD PROTECTION

文件：776.08 Kbytes 頁數：18 Pages

TI

德州儀器

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ?15-kV ESD PROTECTION

文件：178.55 Kbytes 頁數：18 Pages

TI

德州儀器

具有 +/-15kV ESD 保護的 2.5V 雙路 460kbps RS-232 線路驅動器/接收器

The MAX3318 is a dual-driver, dual-receiver, RS-232 compatible transceiver. The device features auto-power-down plus and enhanced electrostatic discharge (ESD) protection integrated into the chip. Driver output and receiver input are protected to ±8 kV using the IEC 61000-4-2 Air-Gap Discharge metho ? ESD Protection for RS-232 I/O Pins \n? ±8 kV (IEC 61000-4-2, Contact Discharge)\n? 300-μA Operating Supply Current\n? Designed to Transmit at a Data Rate of 460 kbps\n? Operates From a Single 2.25-V to 3-V VCC Supply;

TI

德州儀器

2.5V、1μA、460kbps、RS-232兼容收發器

MAX3316–MAX3319配備專有的低壓差發射器輸出級，可利用雙電荷泵通過+2.25V至+3.0V電源實現RS-232兼容性能。這些器件僅需要四個0.1μF電容，并支持以高達460kbps的數據速率運行。\n\n MAX3318/MAX3319均采用Maxim開創性的AutoShutdown Plus?功能，可實現1μA的電源電流。當RS-232電纜斷開連接或所連外設的發射器處于非活動狀態超過30秒時，這些器件會自動進入低功耗關斷模式。當任何發射器或接收器輸入端檢測到有效轉換時，這些器件會再次開啟。AutoShutdown Plus無需更改現有的BIOS或操作系統也能實現節電。M ? AutoShutdown Plus (MAX3318/MAX3319)\n\n? 工作電源電流：300μA\n\n? 接收器處于活動狀態時關斷的功耗低至1μA\n\n? 支持460kbps數據速率\n\n? 支持4V/μs擺率\n\n? RS-232兼容低至2.25V的電壓;

ADI

亞德諾

2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES ? ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) ? 300-μA Operating Supply Current ? 1-μA Low-Power Standby (With Receivers Active) Mode ? Designed to Transmit at a Data Rate of

文件：516.049 Kbytes 頁數：22 Pages

TI

德州儀器

2.5V, 1uA, 460kbps, RS-232-Compatible Transceivers

General Description The MAX3316–MAX3319 transceivers have a proprietary low-dropout transmitter output stage enabling RS-232-compatible performance from +2.25V to +3.0V with a dual-charge pump. These devices require only four 0.1μF capacitors, and are guaranteed to operate at data rates up to 460

文件：214.01 Kbytes 頁數：15 Pages

MAXIM

美信

絲?。?a target="_blank" title="Marking" href="/mp318c/marking.html">MP318C；Package：SSOP；2.5-V 460-kbps RS-232 TRANSCEIVER WITH ±15-kV ESD PROTECTION

1FEATURES ? ESD Protection for RS-232 I/O Pins – ±15 kV (Human-Body Model) – ±8 kV (IEC 61000-4-2, Contact Discharge) – ±8 kV (IEC 61000-4-2, Air-Gap Discharge) ? 300-μA Operating Supply Current ? 1-μA Low-Power Standby (With Receivers Active) Mode ? Designed to Transmit at a Data Rate of

文件：515.289 Kbytes 頁數：22 Pages

TI

德州儀器