RF Power Detectors in UCSP

General Description The MAX2205–MAX2208 wideband (800MHz to 2GHz) power detectors are ideal for GSM/EDGE (MAX2206), TDMA (MAX2207), and CDMA (MAX2205/MAX2208) applications. The MAX2206/MAX2207/MAX2208 take an RF signal from a directional coupler at the input, and output a highly repeatable voltag

文件：170.85 Kbytes 頁數：7 Pages

MAXIM

美信

RF Power Detectors in UCSP

文件：141.86 Kbytes 頁數：7 Pages

MAXIM

美信

Fully Assembled and Tested

文件：91.14 Kbytes 頁數：5 Pages

MAXIM

美信

RF功率檢測器，UCSP封裝

MAX2205–MAX2208寬帶(800MHz至2GHz)功率檢測器對于GSM/EDGE (MAX2206)、TDMA (MAX2207)和CDMA (MAX2205/MAX2208)應用非常理想。MAX2206/MAX2207/MAX2208通過定向耦合器從輸入端獲得RF信號，并輸出高重復性的電壓。輸出電壓隨輸入功率的增加單調上升。對輸出進行了溫度補償和工藝變化補償，可以將最壞情況的輸出變化減小到滿功率時低于±1dB，最低功率時低于±2.5dB。\n MAX2206具有40dB的動態范圍，非常適用于GSM/EDGE應用。對于TDMA應用，MAX2207具有更低的電流消耗。MAX2205/M \n? 節省空間的2 x 2 UCSP封裝，占用面積僅1mm2 \n? 內部溫度補償提供±0.3dB檢測精度 \n? 不需要外部濾波器或運放 \n? 功率檢測范圍\n? 40dB (MAX2206) \n? 25dB (MAX2205/MAX2207/MAX2208);

ADI

亞德諾

RF Power Detectors in UCSP

General Description The MAX2205–MAX2208 wideband (800MHz to 2GHz) power detectors are ideal for GSM/EDGE (MAX2206), TDMA (MAX2207), and CDMA (MAX2205/MAX2208) applications. The MAX2206/MAX2207/MAX2208 take an RF signal from a directional coupler at the input, and output a highly repeatable voltag

文件：170.85 Kbytes 頁數：7 Pages

MAXIM

美信

Robust Design with -1kV Line-to-Line and Line-to- GND Surge Transient Immunity

文件：964.91 Kbytes 頁數：12 Pages

MAXIM

美信

Robust Design with -1kV Line-to-Line and Line-to- GND Surge Transient Immunity

文件：964.91 Kbytes 頁數：12 Pages

MAXIM

美信

Robust Design with -1kV Line-to-Line and Line-to- GND Surge Transient Immunity

文件：964.91 Kbytes 頁數：12 Pages

MAXIM

美信

RF Power Detectors in UCSP

文件：141.86 Kbytes 頁數：7 Pages

MAXIM

美信

RF Power Detectors in UCSP

文件：141.86 Kbytes 頁數：7 Pages

MAXIM

美信