Dual 10-Bit, 105Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs

General Description The MAX1180 is a 3.3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, nine stage ADCs. The MAX1180 is optimized for low-power, high-dynamic performance applications in imaging, instrument

文件：573.67 Kbytes 頁數：20 Pages

MAXIM

美信

Single-Ended or Fully Differential Signal Input Configuration

文件：497.32 Kbytes 頁數：9 Pages

MAXIM

美信

雙路、10位、105Msps、3.3V、低功耗ADC，內置電壓基準及并行輸出

MAX1180為3.3V、雙路、10位模/數轉換器(ADC)，具有全差分、寬帶采樣/保持電路(T/H)，驅動兩路流水線、9階ADC。MAX1180非常適合低功耗、具有高動態性能的圖像、儀表和數字通信等應用。MAX1180采用單電源2.7V至3.6V供電，耗電僅413mW，輸入頻率為20MHz、采樣速率為105Msps時可提供58.5dB的典型信噪比(SNR)。T/H驅動輸入級采用400MHz (-3dB)輸入放大器。該轉換器也可用于單端輸入，除低功耗特性外，MAX1180還提供一個2.8mA的休眠模式以及1μA關斷模式，在空閑周期內可有效節省功耗。\n\n 內部2.048V精密帶隙基 ? 3.3V單電源工作\n? 出色的動態特性\n? fIN = 20MHz時SNR為58.5dB \n? fIN = 20MHz時SFDR為72dB \n\n\n? fIN = 20MHz至100MHz，SNR平坦度在1dB以?xún)?nèi) \n? 低功耗\n? 125mA (標準工作模式)\n? 2.8mA (休眠模式)\n? 1μA (關斷模式)\n\n\n? 0.02dB增益與0.25°相位匹配度(典型值)\n? ±1VP-P較寬的差分模擬輸入電壓范圍 \n? 400MHz -3dB輸入帶寬 \n? 片上2.048V精密帶隙基準 \n? 用戶可選擇的輸出格式 - 二的補碼或偏移二進制碼 \n? 焊盤;

ADI

亞德諾

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信

Low-Power, Ultra-Small Resistive Touch-Screen Controllers with I2C/SPI Interface

General Description The MAX11800–MAX11803 low-power touch-screen controllers operate from a single supply of 1.70V to 3.6V, targeting power-sensitive applications such as handheld equipment. The devices contain a 12-bit SAR ADC and a multiplexer to interface with a resistive touch-screen panel. A

文件：917.77 Kbytes 頁數：56 Pages

MAXIM

美信