4 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56749FP is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4 channel actuators by 1 chip due to include 4 channel BTL drivers. Also, this device include a mute circuit, a Vcc check circuit and TSD function. FEATURES ● Lower sa

文件：1.29123 Mbytes 頁數：6 Pages

MITSUBISHI

三菱電機

4 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56749FP is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4 channel actuators by 1 chip due to include 4 channel BTL drivers. Also, this device include a mute circuit, a Vcc check circuit and TSD function. FEATURES ● Lower sa

文件：1.29123 Mbytes 頁數：6 Pages

MITSUBISHI

三菱電機

3-PHASE BRUSHLESS MOTOR DRIVER

Outline M56750FP is a 3 phase brushless motor driver that include charge pump circuit, which is inputted a acceleration and deceleration pulse signal from a external discriminator circuit. The pulse width is converted to the voltage by the above charge pump circuit and a external filter. And, t

文件：118.6 Kbytes 頁數：9 Pages

RENESAS

瑞薩

2-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56753FP is a semiconductor IC developed as the motor driver used DVD, DVD-ROM, CD-ROM and CD Player. This device include 2 channel BTL drivers and can drive 2 actuators with one IC at the same time. Also, the mute circuit, thermal protection circuit and VREF voltage monitor cir

文件：145.85 Kbytes 頁數：5 Pages

MITSUBISHI

三菱電機

4-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56754SP is a semiconductor IC developed as the motor driver used for CD-ROM and CD player. This circuit includes 4-Channel BTL Driver that is able to drive four actuator with one IC. FEATURES ●Low Output saturation voltage(typ:1.35V at 0.5A) ●Large operating supply voltage ra

文件：898.46 Kbytes 頁數：7 Pages

MITSUBISHI

三菱電機

4-CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56754SP is a semiconductor IC developed as the motor driver used for CD-ROM and CD player. This circuit includes 4-Channel BTL Driver that is able to drive four actuator with one IC. FEATURES ●Low Output saturation voltage(typ:1.35V at 0.5A) ●Large operating supply voltage ra

文件：898.46 Kbytes 頁數：7 Pages

MITSUBISHI

三菱電機

SPINDLE MOTOR DRIVER

DESCRIPTION The M56755AFP is a semiconductor integrated circuit designed for a single chip controller for CD-ROM spindle motor. M56755AFP has a both (forward and reverse) motor torque control by the motor speed control terminal. M56755AFP has the several braking mode that an user can flexibly s

文件：213.87 Kbytes 頁數：10 Pages

MITSUBISHI

三菱電機

SPINDLE MOTOR DRIVER

DESCRIPTION The M56755FP is a semiconductor integrated circuit designed for a single chip controller for CD-ROM spindle motor. M56755FP has a both (forward and reverse) motor torque control by the motor speed control terminal. FEATURES ●The supply voltage with wide range. (4.5V to 13.2V

文件：767.41 Kbytes 頁數：9 Pages

MITSUBISHI

三菱電機

5 CHANNEL ACTUATOR MOTOR DRIVER

DESCRIPTION The M56758FP is a semiconductor integrated circuit designed for a actuator driver used for MD, CD-audio, etc. This device can function 5-channel-actuators by 1 chip due to include 5 channel BTL drivers. Sufficient output dynamic range can be obtained by low supply voltage because sat

文件：334.07 Kbytes 頁數：9 Pages

MITSUBISHI

三菱電機

4-CHANNEL ACTUATOR DRIVER

DESCRIPTION The M56759 is a semiconductor integrated circuit designed for a CD-ROM actuator driver. This device can function 4-channel-actuators by 1 chip due to include 4 channel BTL drivers. Three channels of this device, ch1, ch2 and ch3 can be controlled by PWM pulse. Two of them, ch1 and ch

文件：381.23 Kbytes 頁數：11 Pages

MITSUBISHI

三菱電機