LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features ? Provides bidirectional voltage translation with no direction pin ? Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load ? Allows bidirectional voltage-level translation betwee

文件：3.17475 Mbytes 頁數：53 Pages

TI

德州儀器

LSF010x 1/2/8 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open- Drain and Push-Pull Applications

1 Features ? Provides bidirectional voltage translation with no direction pin ? Supports up to 100-MHz up translation and greater than 100-MHz down translation at ≤ 30 pF cap load and up To 40-MHz up/down translation at 50 pF cap load ? Allows bidirectional voltage-level translation betwee

文件：3.52881 Mbytes 頁數：57 Pages

TI

德州儀器

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features ? Provides bidirectional voltage translation with no direction pin ? Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load ? Allows bidirectional voltage-level transla

文件：2.03985 Mbytes 頁數：42 Pages

TI

德州儀器

LSF0102-Q1 Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

1 Features ? AEC-Q100 qualified for automotive applications – Temperature grade 1: –40°C ≤ TA ≤ 125°C – Device HBM ESD Classification Level 2 – CDM ESD Classification Level C6 ? Provides bidirectional voltage translation with no direction Pin ? Supports open drain and push-pull applications

文件：1.03975 Mbytes 頁數：27 Pages

TI

德州儀器

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features ? Provides bidirectional voltage translation with no direction pin ? Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load ? Allows bidirectional voltage-level transla

文件：2.00903 Mbytes 頁數：42 Pages

TI

德州儀器

2-bit bidirectional multi-voltage level translator; open-drain; push-pull

1. General description The LSF0102 is a 2 channel bidirectional multi-voltage level translator for open-drain and push-pull applications. It supports up to 100 MHz up translation and ≥100 MHz down translation at ≤ 30 pF capacitive load. There is no need for a direction pin which minimizes syste

文件：240.26 Kbytes 頁數：15 Pages

NEXPERIA

安世

Automotive 2-Channel Auto Bidirectional Multi-Voltage Level Translator

文件：405.79 Kbytes 頁數：18 Pages

TI

德州儀器

Channel Bidirectional Multi-Voltage Level Translator

文件：1.73251 Mbytes 頁數：39 Pages

TI

德州儀器

2-Bits Bidirectional Level Translator, Open-Drain and Push-Pull Applications

The LSF0102 is a 2-channel bidirectional multi-voltage level translator for open-drain and push-pull applications. This device is a universal level translator that A port operates from 0.65V to 4.5V (Vref_A) and B port 1.8V to 5.5V (Vref_B). This range allows for bidirectional voltage translations b

Diodes

美臺半導體

雙路雙向多電壓電平轉換器

LSF 系列器件支持雙向電壓轉換，而且無需使用 DIR 引腳，最大限度降低了系統工作量（PMBus、I2C、SMBus 等）。LSF 系列器件在容性負載 ≤ 30pF 時最高支持 100MHz 的升壓轉換和 100MHz 以上的降壓轉換；在容性負載為 50pF 時最高支持 40MHz 的升壓/降壓轉換，因此可支持更多的消費類或電信接口（MDIO 或 SDIO）。\n\nLSF 系列的 IO 端口能夠耐受 5V 電壓，因此與工業和電信應用中的 TTL 電平兼容。LSF 系列極具靈活性，能夠?yàn)槊織l通道設置不同電壓轉換電平。 ? 在無方向引腳的情況下提供雙向電壓轉換\n? 可實現以下電壓之間的雙向電壓電平轉換 \n? 1.2V ? 1.8/2.5/3.3/5V\n? 2.5V ? 3.3/5V\n? 低待機電流\n? 低 RON 可提供較少的信號失真\n? 采用直通引腳以簡化 PCB 布線\n? -40°C 至 125°C 工作溫度范圍;

TI

德州儀器