Integrated solenoid driver

文件：1.92439 Mbytes 頁數：2 Pages

STMICROELECTRONICS

意法半導體

Integrated solenoid driver

ST

意法半導體

Integrated solenoid driver for automotive applications

Features ? Automotive qualified ? Excitation switch S1 = 60mΩ ? Recirculation switch S2 = 60 mΩ ? CMOS compatible inputs ? Load current up to 14 A ? Integrated clamp structure – Switch S1 clamp voltage = 45 V (minimum) ? Current sense amplifier with internal sense resistor ? S1 switch PW

文件：2.14268 Mbytes 頁數：46 Pages

STMICROELECTRONICS

意法半導體

for car body applications

Description The L5958 includes 6 linear voltage regulators and a 2 A power switch, working down to 4.5 V battery level. All the voltage regulators can be switched off through the three enable pins. Features ■ L5958 six outputs: – 8.5 V @ 200 mA – 5.0 V @ 300 mA – 3.3 V @ 250 mA

文件：1.8271 Mbytes 頁數：22 Pages

STMICROELECTRONICS

意法半導體

Integrated solenoid driver for automotive applications

Features ? Automotive qualified ? Excitation switch S1 = 60mΩ ? Recirculation switch S2 = 60 mΩ ? CMOS compatible inputs ? Load current up to 14 A ? Integrated clamp structure – Switch S1 clamp voltage = 45 V (minimum) ? Current sense amplifier with internal sense resistor ? S1 switch PW

文件：2.14268 Mbytes 頁數：46 Pages

STMICROELECTRONICS

意法半導體

集成電磁閥驅動器，用于汽車應用

The L99SD01-E is a device intended for driving inductive loads.\n\n The inputs are CMOS-compatible. The diagnostic outputs CLAMP_FLAG and FAULT provide an indication of demagnetization mode and fault conditions, respectively.\n\n The integrated standard serial interface (I2C) allows to digitally set ? Excitation switch S1 = 60 mΩ \n? Recirculation Switch S2= 60 mΩ \n? CMOS compatible Inputs \n? Load current up to 14 A \n? Integrated clamp structure \n ?Switch S1clamp voltage = 45 V (minimum) \n? Current sense amplifier with internal sense resistor \n? S1switch PWM operation above 10 KHz? I2C st;

ST

意法半導體