HIGH VOLTAGE HALF BRIDGE DRIVER WITH OSCILLATOR

DESCRIPTION The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal. ■HIGH VOLTAGE RAIL UP TO

文件：60.17 Kbytes 頁數：7 Pages

STMICROELECTRONICS

意法半導體

HIGH VOLTAGE HALF BRIDGE DRIVER WITH OSCILLATOR

DESCRIPTION The device is a high voltage half bridge driver with built in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor. The internal circuitry of the device allows it to be driven also by external logic signal. ■HIGH VOLTAGE RAIL UP TO

文件：60.17 Kbytes 頁數：7 Pages

STMICROELECTRONICS

意法半導體

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 頁數：12 Pages

STMICROELECTRONICS

意法半導體

High voltage half bridge driver with oscillator

Features ■ High voltage rail up to 600 V ■ BCD off line technology ■ 15.6 V Zener clamp on Vs ■ Driver current capability: – Sink current = 270 mA – Source current = 170 mA ■ Very low start up current: 150 mA ■ Undervoltage lockout with hysteresis ■ Programmable oscillator frequency ■ De

文件：234.5 Kbytes 頁數：12 Pages

STMICROELECTRONICS

意法半導體

High voltage smart ballast controller

Features ■ 600 V half-bridge driver ■ Integrated bootstrap diode ■ Failure protection logic ■ Programmable deadtime ■ Programmable preheated start ■ Two-step dimming with programmable dimmed current ■ Thermal powerboost ■ Closed loop control operation Applications ■ CFLi ■ Electronic

文件：435.62 Kbytes 頁數：22 Pages

STMICROELECTRONICS

意法半導體

CFL/TL BALLAST DRIVER PREHEAT AND DIMMING

DESCRIPTION In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications. The device is intended to drive two power MOS FETS, in the classical half bridge topology, ensuring all the features

文件：169.18 Kbytes 頁數：10 Pages

STMICROELECTRONICS

意法半導體

CFL/TL BALLAST DRIVER PREHEAT AND DIMMING

DESCRIPTION In order to ensure voltage ratings in excess of 600V, the L6574 is manufactured with BCD OFF LINE technology, which makes it well suited for lamp ballast applications. The device is intended to drive two power MOS FETS, in the classical half bridge topology, ensuring all the features

文件：169.18 Kbytes 頁數：10 Pages

STMICROELECTRONICS

意法半導體

FULLY INTEGRATED POWER SUPPLY FIPS

DESCRIPTION The L6590 is a monolithic switching regulator designed in BCD OFF-LINE technology, able to operate with wide range input voltage and to deliver up to 15W output power. The internal power switch is a lateral power MOSFET with a typical RDS(on) of 13? and a V(BR)DSS of 700V minimum. ■

文件：360.07 Kbytes 頁數：23 Pages

STMICROELECTRONICS

意法半導體

FULLY INTEGRATED POWER SUPPLY

DESCRIPTION The L6590A is a monolithic switching regulator designed in BCD OFF-LINE technology, able to operate with wide range input voltage and to deliver up to 15W output power. The internal power switch is a lateral power MOSFET with a typical RDS(on) of 13? and a V(BR)DSS of 700V minimum. ■

文件：238.16 Kbytes 頁數：19 Pages

STMICROELECTRONICS

意法半導體

FULLY INTEGRATED POWER SUPPLY FIPS

DESCRIPTION The L6590 is a monolithic switching regulator designed in BCD OFF-LINE technology, able to operate with wide range input voltage and to deliver up to 15W output power. The internal power switch is a lateral power MOSFET with a typical RDS(on) of 13? and a V(BR)DSS of 700V minimum. ■

文件：360.07 Kbytes 頁數：23 Pages

STMICROELECTRONICS

意法半導體