Very low drop voltage regulators with inhibit

Description The KFxx series are very low drop regulators available in SO-8 package and in a wide range of output voltages. Features ■ Very low dropout voltage (0.4 V) ■ Very low quiescent current (typ. 50 μA in OFF Mode, 500 μA in ON Mode) ■ Output current up to 500 mA ■ Logic-controlled ele

文件：740.67 Kbytes 頁數(shù)：22 Pages

STMICROELECTRONICS

意法半導體

Very low drop voltage regulators with inhibit

Features Very low dropout voltage (0.4V) Very low quiescent current (typ. 50 μA in OFF MODE, 500 μA in ON MODE) Output current up to 500 mA Logic-controlled electronic shutdown Output voltages of 1.5; 2.5; 3; 3.3; 4; 5; 5.2; 6; 8 Internal current and thermal limit Only 2.2 μF for stability

文件：317.97 Kbytes 頁數(shù)：22 Pages

STMICROELECTRONICS

意法半導體

VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT

DESCRIPTION The KF00 series are very Low Drop regulators availablein SO-8 package and in a wide range of output voltages. The very Low Drop voltage (0.4V) and the very low quiescent current make them particularly suitable for Low Noise, Low Power applications and specially in battery powered

文件：224.72 Kbytes 頁數(shù)：17 Pages

STMICROELECTRONICS

意法半導體

Compact high speed thick film thermal printhead (12 dots / mm)

Using its expertise in LSI technology, ROHM has developed new high density driver chips for use in the KF3002-GD31A . Capable of being employed for both thermal and thermal transfer printing, with a print speed of 200mm/s, the resulting print heads are the fastest in their class. The high-speed and 1) The use of a special partial glaze and the latest heating element structure, along with new high-density driver chips that\ncan accept big current, has allowed ROHM to achieve print speeds of 200mm/s with using thermal history control, the fastest in its class.\n2) One rank resistance value of 12;

ROHM

羅姆

Thick Film Thermal Printhead (300DPI)

KF3002-GL50A is developing type of GL40 series which are developed mainly for label printe rs. We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high speed and good printing quality. That is KF3002-GL50A which is 24V standard thick film 1) Perform 150km life time adopting new protective coat. (Perform three times life time by coefficient of abrasion which is about is about 1/10 of current mass-producing coat.)\n2) Build in thermal high speeded heater and perform high printing 6 IPS. (150mm / s)\n3) Available for thermal transfer pr;

ROHM

羅姆

N 溝道

KEFAXIN

科發(fā)鑫