Teccor? brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 頁數：12 Pages

LITTELFUSE

力特

Teccor? brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：1.50101 Mbytes 頁數：12 Pages

LITTELFUSE

力特

Teccor? brand Thyristors Standard Bidirectional SIDACs

Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance region to a low on-state voltage. Conduction continues until the current is interrupted or drops be

文件：431.95 Kbytes 頁數：12 Pages

LITTELFUSE

力特

Soft, round, 6mm dia, Hard, flat, 12mm wide, Hard, flat, 25mm wide

[VERMASON] Description: The brushes consist of a conductive plastic handle and Thunderon conductive fibres, mixed with animal hair if stiffness is desired. Resistance from the tip of the brush to the handle is less than 5 x 106 ohm. Brushes should be used by operators who are earthed

文件：262.85 Kbytes 頁數：1 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

Soft, round, 6mm dia, Hard, flat, 12mm wide, Hard, flat, 25mm wide

[VERMASON] Description: The brushes consist of a conductive plastic handle and Thunderon conductive fibres, mixed with animal hair if stiffness is desired. Resistance from the tip of the brush to the handle is less than 5 x 106 ohm. Brushes should be used by operators who are earthed

文件：262.85 Kbytes 頁數：1 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

Graphite Powder

Features Graphite powder for dry lubrication of door locks and padlocks Greasless and odourless

文件：132.41 Kbytes 頁數：1 Pages

CARL

Soft, round, 6mm dia, Hard, flat, 12mm wide, Hard, flat, 25mm wide

[VERMASON] Description: The brushes consist of a conductive plastic handle and Thunderon conductive fibres, mixed with animal hair if stiffness is desired. Resistance from the tip of the brush to the handle is less than 5 x 106 ohm. Brushes should be used by operators who are earthed

文件：262.85 Kbytes 頁數：1 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：381.58 Kbytes 頁數：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：381.58 Kbytes 頁數：4 Pages

KG

HIGH POWER LATCHING RELAY

Application Notes 1. It is possible that during transit or final assembly the relay could change state. Therefore, it is recommended that all relays be set to the desired state via a power supply. 2. In order to maintain an “Open” or “Closed” state of the relay, the coil voltage should reach the

文件：381.58 Kbytes 頁數：4 Pages

KG