ROOM HUMIDITY / TEMPERATURE TRANSMITTER

PRODUCT DESCRIPTION The HTRC Humidity/Temperature transmitter incorporates two sensors in one attractive wall mount enclosure for the most efficient environmental monitoring and control system. It uses a field-proven RH sensor to monitor relative humidity and a curve-matched thermistor to m

文件：226.45 Kbytes 頁數：2 Pages

GREYSTONE

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on 恩XP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 頁數：22 Pages

恩XP

HITAG reader chip

GENERAL DESCRIPTION HITAG(1) is the family name of the reader chip HTRC11001T to use with transponders which are based on the HITAG tag ICs (HT1ICS3002x or HT2ICS2002x). The receiver parameters (gain factors and filter cut-off frequencies) can be optimized to system and transponder requirements.

文件：94.49 Kbytes 頁數：20 Pages

PHI

PHI

HITAG reader chip

GENERAL DESCRIPTION HITAG(1) is the family name of the reader chip HTRC11001T to use with transponders which are based on the HITAG tag ICs (HT1ICS3002x or HT2ICS2002x). The receiver parameters (gain factors and filter cut-off frequencies) can be optimized to system and transponder requirements.

文件：94.49 Kbytes 頁數：20 Pages

PHI

PHI

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on 恩XP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 頁數：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on 恩XP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 頁數：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on 恩XP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 頁數：22 Pages

恩XP

HITAG reader chip

General description The HITAG Reader Chip HTRC110 is intended for use with transponders, which are based on 恩XP Semiconductors based HITAG transponder ICs. Features and benefits ■ Optimized for HITAG transponder ICs ■ Robust antenna coil power driver stage with modulator ■ High performance ad

文件：192.35 Kbytes 頁數：22 Pages

恩XP

HITAG co-processor

GENERAL DESCRIPTION The HITAG(1) co-processor is designed to perform all computations of the read/write device in a system where HITAG1 and HITAG2 transponders are used. The device performs all encryption computations needed to access transponders and cards based on the HITAG1 respectively HITAG

文件：57.99 Kbytes 頁數：8 Pages

PHI

PHI

HITAG讀卡器解決方案

HITAG讀卡器芯片HTRC110可搭配采用恩XPHITAG應答器IC的應答器使用。\n此外，該IC還支持其他125 kHz應答器類型，采用幅度調制實現寫入操作，并采用AM/PM實現讀取操作。接收器參數（增益系數、濾波器截止頻率）可根據系統和應答器要求進行優化。HTRC110設計為可輕松實現RF識別讀卡器的集成。采用一流的技術，幾乎完全集成所需的構建塊。強大的天線驅動器/調制器配合低噪聲自適應采樣時間解調器、可編程濾波器/放大器和數字化器，共同構成了完整的收發器單元，可用在高性能讀卡器設計中。采用三針腳微控制器接口來編程HTRC110以及用來實現與應答器的雙向通信。連接數據的輸入和輸出后，三線 針對HITAG應答器IC進行了優化\n強大的天線線圈電源驅動器級，集成調制器\n高性能自適應采樣時間AM/PM解調器（正在申請專利）\n讀取和寫入功能\n片內時鐘振蕩器\n天線斷裂和短路檢測\n低功耗\n待機模式具有極低功耗\n外部元件數量較少\n采用小型封裝(SO14);

恩XP