Differential Hall Effect Sensor IC

Introduction The HAL300 is a differential Hall switch produced in CMOS technology. The sensor includes 2 temperature compensated Hall plates (2.05 mm apart) with active offset compensation, a differential amplifier with a Schmitt trigger, and an open-drain output transistor (see Fig. 2). Feature

文件：140.29 Kbytes 頁數：17 Pages

MICRONAS

Differential Hall Effect Sensor IC

文件：1.62978 Mbytes 頁數：22 Pages

MICRONAS

差動霍爾效應集成電路

HAL 300和HAL 320是以CMOS技術生產的差動開關。傳感器包括兩個主動偏置補償?shù)臏囟妊a(bǔ)償霍爾片，一個帶有施密特觸發器的差動放大器，和一個開漏輸出晶體管。差動傳感器感應磁場的空間位置變化。差動放大器會放大S1和S2兩塊霍爾片的霍爾電壓。差動信號和施密特觸發器中預設的開關值進行比較。相應地，輸出晶體管進行開關動作。在HAL300打標面封裝前旋轉的多極磁環可以產生差動信號，或者在HAL320的封裝背面在兩個霍爾片產生反偏壓。主動偏置補償使得磁參數在全電壓和全溫度下都是持續的。該傳感器系為汽車和工業應用設計，工作電壓從4.5伏到24伏，溫度范圍從–40 °C up to 170 °C。有SM ·Distance between Hall plates: 2.05?mm\n·Operates from 4.5 V to 24 V supply voltage\n·Switching offset compensation at 62 kHz\n·Overvoltage protection\n·Reverse-voltage protection at VDD-pin\n·Short-circuit protected open-drain output by thermal shutdown\n·Operates with magnetic fields from DC to 10;

TDK-Micronas

Package：TO-226-3，TO-92-3 短體；包裝：帶盒（TB） 功能：卡銷 類別：傳感器，變送器 磁性傳感器 - 開關（固態） 描述：MAGNETIC SWITCH LATCH TO92UA-4

TDK-Micronas GmbH