2-bit bi-directional low voltage translator

Description Within the semiconductor world, there are many I/O standards that have different voltage level requirements for the input voltage (VIH or VIL) and output voltage (VOH or VOL) typically based on the device operating voltage. These voltage levels define how the device communicates with

文件：114.64 Kbytes 頁數(shù)：14 Pages

PHI

PHI

2-bit bidirectional low voltage translator

General description The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor

文件：138.44 Kbytes 頁數(shù)：22 Pages

恩XP

恩XP bidirectional low-voltage translators

Low cost bidirectional voltage translation without directional control Unlike level-shifting bus switches, which only translate between fixed voltages, these bidirectional low-voltage translators can translate any voltage between 1 and 5 V to any other voltage between 1 and 5 V. They also re

文件：263.32 Kbytes 頁數(shù)：2 Pages

恩XP

2位雙向低電壓變換器

The Gunning Transceiver Logic - Transceiver Voltage Clamps (GTL-TVC) provide high-speed voltage translation with low ON-state resistance and minimal propagation delay. The GTL2002 provides 2 NMOS pass transistors (Sn and Dn) with a common gate (GREF) and a reference transistor (SREF and DREF). The d 2-bit bidirectional low voltage translator\nAllows voltage level translation between 1.0 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5 V buses, which allows direct interface with GTL, GTL+, LVTTL/TTL and 5 V CMOS levels\nProvides bidirectional voltage translation with no direction pin\nLow 6.5 Ω ON-sta;

恩XP