GD65232中文資料具有 +/-7.5V 輸出和 +/-1.5kV ESD 保護的 5V 多通道 120kbps RS-232 線路驅動器/接收器數據手冊TI規格書

描述 Description

The GD65232 and GD75232 combine three drivers and five receivers from the Texas Instruments trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The pinout matches the flow-through design of the SN75C185 to decrease the part count, reduce the board space required, and allow easy interconnection of the UART and serial-port connector of an IBM. PC/AT and compatibles. The bipolar circuits and processing of the GD65232 and GD75232 provide a rugged, low-cost solution for this function at the expense of quiescent power and external passive components relative to the SN75C185.

The GD65232 and GD75232 comply with the requirements of the TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signaling rates up to 20 kbit/s. The switching speeds of these devices are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be expected unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of TIA/EIA-423-B (ITU V.10) and TIA/EIA-422-B (ITU V.11) standards is recommended.

特性 Features

? Single Chip With Easy Interface Between UART and Serial-Port Connector of IBM? PC/AT and Compatibles
? Meet or Exceed the Requirements of TIA/EIA-232-F and ITU v.28 Standards
? Designed to Support Data Rates up to 120 kbit/s
? Pinout Compatible With SN75C185 and SN75185

簡介

GD65232屬于集成電路（IC）的驅動器接收器收發器。由TI制造生產的GD65232驅動器，接收器，收發器該系列產品的主要功能是提供必需的硬件資源，以通過延長電纜或印制線進行通信。確切的功能會因所采用的通信協議而異，可能包括諸如瞬態抑制之類的功能，這些功能對于通信用途可能并非絕對必要，但對于可能的使用環境卻是明智之選。