ISA/LPC to 6 UART Datasheet

文件：1.41439 Mbytes 頁數(shù)：64 Pages

FINTEK

精拓科技

eSPI/LPC/USB/PCIE I/F Controller

The F81218 mainly provides 4 pure UART and 2 SIR+UART ports through ISA or LPC interface which cab be selected by hardware setting.? Each UART includes 16-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability and an interrupt system. When using ISA interface m Supports LPC or ISA interface (1?hardware setting pin to define LPC or ISA I/F )\nIn LPC mode, also provides simple LPC to ISA bridge\nTotally provides 6?UART (16550 asynchronous) ports\n? ? ? ? ? ? ? ? ?- ? 4 pure UART ports\n? ? ? ? ? ? ? ? ?- ? 2 SIR+ UART ports\nProvides?6 IRQ?and each?one?can?b;

FINTEK

精拓科技

ISA/LPC to 6 UART Datasheet

文件：1.41439 Mbytes 頁數(shù)：64 Pages

FINTEK

精拓科技

ISA/LPC to 6 UART Datasheet

文件：1.41439 Mbytes 頁數(shù)：64 Pages

FINTEK

精拓科技

eSPI/LPC/USB/PCIE I/F Controller

The F81218E LPC to 6 UART controller or eSPI to 6 UART controller. Each UART includes 128-byte send/receive FIFO, a programmable baud rate generator, complete modem control capability, auto flow control, RX/TX LED and an interrupt system. F81218E support programmable CLKIN and two sets of CLKOUTs. O ? Supports LPC/eSPI auto detection interface\n? Totally provides 6 128-byte FIFO UART (16950 asynchronous) ports\n? LED status indication for UART TX/RX\n? Auto flow control\n? 1 watch dog timer with WDT_OUT# signal\n? Support 9-bit protocol\n? 48 pins GPIO; GPIO34/35 support 6 selectable functions\;

FINTEK

精拓科技