Rotary Decoder - 3 wire 2x Interface

Description The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required o

文件：57.64 Kbytes 頁數(shù)：9 Pages

ELM

3 wire 2x Interface

The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required over the entire 2. ·Low power CMOS design\n·Wide supply range – 2.0 to 5.5 volts\n·Complete debouncing of the encoder inputs\n·No external filtering needed\n·2x decoding\n·Startup delay timer\n·High current drive outputs;

ELM

Rotary Decoder - 3 wire 2x Interface

Description The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required o

文件：57.64 Kbytes 頁數(shù)：9 Pages

ELM

Rotary Decoder - 3 wire 2x Interface

Description The ELM404 is an 8 pin integrated circuit that is used to convert the output from a rotary encoder into three signals (chip select, clock and up/down) that can be used to control various devices. The low power CMOS technology used ensures that only a very small current is required o

文件：57.64 Kbytes 頁數(shù)：9 Pages

ELM