Rotary Decoder - 2 wire 2x Interface

Description The ELM402 is an 8 pin integrated circuit that is used to convert the signals from a rotary encoder into a series of up and down output pulses. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. Feat

文件：59.71 Kbytes 頁數：9 Pages

ELM

2 wire 2x Interface

The ELM402 is an 8 pin integrated circuit that is used to convert the signals from a rotary encoder into a series of up and down output pulses. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range.\n\n There is no ne ·Low power CMOS design\n·Wide supply range – 2.0 to 5.5 volts\n·Complete debouncing of the encoder inputs\n·No external filtering needed\n·2x decoding\n·Startup delay timer\n·High current drive outputs;

ELM

Rotary Decoder - 2 wire 2x Interface

Description The ELM402 is an 8 pin integrated circuit that is used to convert the signals from a rotary encoder into a series of up and down output pulses. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. Feat

文件：59.71 Kbytes 頁數：9 Pages

ELM

Rotary Decoder - 2 wire 2x Interface

Description The ELM402 is an 8 pin integrated circuit that is used to convert the signals from a rotary encoder into a series of up and down output pulses. The low power CMOS technology used ensures that only a very small current is required over the entire 2.0 to 5.5 volt operating range. Feat

文件：59.71 Kbytes 頁數：9 Pages

ELM