SECURITY SYSTEM CONTROLLER

Description The ELM365 provides all of the logic necessary for a complete security system in an 8 pin package. The circuit is capable of monitoring two normally closed input loops and one normally open panic circuit, provides a constant level and a pulsing alarm output, and the logic to drive a

文件：30.72 Kbytes 頁數(shù)：4 Pages

ELM

Security System Controller

The ELM365 provides all of the logic necessary for a complete security system in an 8 pin package.\n\n The circuit is capable of monitoring two normally closed input loops and one normally open panic circuit, provides a constant level and a pulsing alarm output, and the logic to drive a status LE ·Low power CMOS design – typically 1mA at 5V\n·Wide supply range – 3.0 to 5.5 volt operation\n·Simultaneous monitoring of three circuits\n·45 second delay for entry and exit\n·Automatic reset of alarm outputs after 5 minutes\n·Status LED output driver\n·High current drive outputs – up to 25 mA\n·Pan;

ELM

SECURITY SYSTEM CONTROLLER

Description The ELM365 provides all of the logic necessary for a complete security system in an 8 pin package. The circuit is capable of monitoring two normally closed input loops and one normally open panic circuit, provides a constant level and a pulsing alarm output, and the logic to drive a

文件：30.72 Kbytes 頁數(shù)：4 Pages

ELM

SECURITY SYSTEM CONTROLLER

Description The ELM365 provides all of the logic necessary for a complete security system in an 8 pin package. The circuit is capable of monitoring two normally closed input loops and one normally open panic circuit, provides a constant level and a pulsing alarm output, and the logic to drive a

文件：30.72 Kbytes 頁數(shù)：4 Pages

ELM