eKTF6708中文資料8-Bit Microcontroller數(shù)據(jù)手冊Elan規(guī)格書

描述 Description

The eKTF6708 is an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology. It has a built-in 6K x 16-bit programmable ROM and is equipped with touch sensors. The capacitive touch key sensor uses plastic or glass substrate as cover. The system controller converts fingertip position data into button presses, depending on finger locationand human interface context. The eKTF6708 OCD can be used to develop user program for this microcontroller and several other ELAN Flash type ICs.

特性 Features

CPU Configuration
? (48 + 1024) bytes general purpose register (SRAM)
? 3 programmable Level Volt Reset (LVR): 4.3V, 3.5V, 2.3V
? Four CPU operation modes: Normal, Green, Idle and Sleep
? 3 bidirectional I/O ports: P5 ~ P7
? 3 programmable pull-down I/O ports: P5 ~ P7
? 3 programmable open-drain I/O ports: P5 ~ P7
? High-drive 30mA (typically)
? 4.5V ~ 5.5V at -40°C ~ 85°C (Industrial Grade)
? High Internal RC oscillator (HIRC): 4MHz, 8MHz, 12MHz & 16MHz ±0.5%@25°C, 5V
? 8-bit real time clock (TCC) with selective signal sources, trigger edges, and overflow interrupt
? One 8-bit timer TC1 with six modes: Timer / Counter / Capture / Window / Buzzer / PWM / PDO (Programmable Divider Output) modes
? 2-channel Analog-to-Digital converter with 12bit resolution + 1 internal reference for Vref & VDD power detector
? I2C function with 7 / 10 bits address and 8 bits data transmit / receive mode, that standard mode is 100K bps and fast mode is 400K bps.
? Power down (Sleep) mode
? External interrupt: P51, P60
? LVD interrupt
? TC1 interrupt
? ADC completion interrupt
? SPI interrupt
? TK Scan interruptSPI interrupt
? System hold interrupt

Single Instruction Cycle Commands