EBE10RD4AEFA-5C-E中文資料爾必達數(shù)據(jù)手冊PDF規(guī)格書

描述 Description

The EBE10RD4AEFA is a 128M words × 72 bits, 1 rank DDR2 SDRAM Module, mounting 18 pieces of DDR2 SDRAM sealed in FBGA (μBGA?) package.

Read and write operations are performed at the cross points of the CK and the /CK. This high-speed data

transfer is realized by the 4bits prefetch-pipelined architecture.

特性 Features

? 240-pin socket type dual in line memory module (DIMM)

? PCB height: 30.0mm

? Lead pitch: 1.0mm

? Lead-free

? Power supply: VDD, VDDQ = 1.8V ± 0.1V

? Data rate: 533Mbps/400Mbps (max.)

? SSTL_18 compatible I/O

? Double-data-rate architecture: two data transfers per clock cycle

? Bi-directional, data strobe (DQS and /DQS) is transmitted /received with data, to be used in capturing data at the receiver

? DQS is edge aligned with data for READs; center aligned with data for WRITEs

? Differential clock inputs (CK and /CK)

? DLL aligns DQ and DQS transitions with CK transitions

? Commands entered on each positive CK edge; data referenced to both edges of DQS

? Four internal banks for concurrent operation (components)

? Burst length: 4, 8

? /CAS latency (CL): 3, 4, 5

? Auto precharge option for each burst access

? Auto refresh and self refresh modes

? Average refresh period

? 7.8μs at 0°C ≤ TC ≤ +85°C

? 3.9μs at +85°C < TC ≤ +95°C

? Posted CAS by programmable additive latency for better command and data bus efficiency

? Off-Chip-Driver Impedance Adjustment and On-Die Termination for better signal quality

? /DQS can be disabled for single-ended Data Strobe operation

? 1 piece of PLL clock driver, 2 pieces of register driver and 1 piece of serial EEPROM (2k bits EEPROM) for

Presence Detect (PD)