Serial Number iButton

General Description The DS1990A serial number iButton? is a rugged data carrier that serves as an electronic registration number for automatic identification. Data is transferred serially through the 1-Wire? protocol, which requires only a single data lead and a ground return. Every DS1990A h

文件：702.16 Kbytes 頁數：10 Pages

AD

亞德諾

RTC iButton

Special Features ?Real-time clock/calendar in binary format ?Uses the same binary time/daterepresentation as the DS1994 but with1 second resolution ?Clock accuracy is better than ±2 minutes permonth at +25°C ?Operating temperature range from -40°C to+85°C ?Over 10 years of operation Common

文件：440.27 Kbytes 頁數：13 Pages

AD

亞德諾

RTC iButton

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

文件：72.93 Kbytes 頁數：12 Pages

DALLAS

Temperature iButton

iButton DESCRIPTION The DS1920 Temperature iButton provides 9-bit temperature readings which indicate the temperature of the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing, and performing temperature conversions is derived from the data line

文件：729.1 Kbytes 頁數：22 Pages

DALLAS

Real-Time Clock/calendar in binary format RTC iButton Over 10 years of operation

iButton DESCRIPTION The DS1904 RTC iButton is a rugged real-time clock module that can be accessed with minimal hardware. Data is transferred serially via the 1-Wire protocol, which requires only a single data lead and a ground return. The DS1904 contains a unique 64-bit factory-lasered ROM and a

文件：139.3 Kbytes 頁數：12 Pages

MAXIM

美信

Hygrochron Temperature/Humidity Logger

文件：649.39 Kbytes 頁數：55 Pages

MAXIM

美信

Logs Up to 2048 Consecutive Temperature Thermochron iButton

文件：675.51 Kbytes 頁數：42 Pages

MAXIM

美信

多用途夾子

The DS9101 multipurpose clip offers the user a low-cost fixture that mounts an iButton? to a plastic badge or, using an additional wire or tie wrap, any object that provides a hole for strap-mounting. In contrast to the DS9093P/S, the DS9101 also allows mounting iButtons to bags or other soft-surfac \n? Attachable to a badge \n? Easy detachment by hand \n? Mountable by safety pin to fabric \n? Two pairs of holes for attachment: one for wire mounting, and one for tie wrap \n? Clipable to shirt pocket \n? Stainless steel 0.5mm thickness;

ADI

亞德諾

包裝：散裝 類別：存儲卡，模塊 配件 描述：IBUTTON MULTIPURPOSE CLIP

AD

亞德諾