SCSI Terminator

DESCRIPTION The SCSI–2 and SCSI–3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with single–ended drivers and receivers. The DS2114 SCSI Terminator, which is fully compliant with these standards, enables the designer to gain the benefits o

文件：71.92 Kbytes 頁數：6 Pages

DALLAS

SCSI Terminator

文件：76.91 Kbytes 頁數：6 Pages

MAXIM

美信

SCSI端接器

The DS2114 is designed to terminate cable assemblies and devices that do not require isolation from the SCSI bus. The small package integrates a voltage regulator and nine precisely trimmed 1100Ω resistors that actively terminate nine signal lines in compliance with SCSI-1, -2, and -3 standards.\n S \n? Fully compliant with SCSI-1, 2, and 3 \n? Actively terminates nine signal lines \n? Supports actively negated SCSI signals \n? Laser-trimmed 110Ω termination resistors with 2% tolerance \n? Low drop-out voltage regulator \n? Onboard thermal shutdown circuitry \n? Operating range:\n? -1.0V to;

ADI

亞德諾

Package：16-SOIC（0.154"，3.90mm 寬）；包裝：管件 類別：集成電路（IC） 信號端接器 描述：IC TERM SCSI 2% 150MIL 16-SOIC

AD

亞德諾