DAC8564集成電路（IC）的數模轉換器（DAC）規格書PDF中文資料

DAC8564屬于集成電路（IC）的數模轉換器（DAC）。由德州儀器制造生產的DAC8564數模轉換器（DAC）數模轉換器（DAC、D/A、D2A 或 D 轉 A）可將數字信號轉換為緩沖或無緩沖的模擬電壓或電流。DAC 架構是否適合特定應用，要取決于分辨率和采樣頻率。DAC 通常用于音樂播放器，將數字數據流轉換為模擬音頻流。它們還用于電視和手機，將數字視頻數據轉換為模擬視頻信號，再連接到屏幕驅動器，以顯示單色或彩色圖像。

1FEATURES

234? Relative Accuracy: 1LSB

? Glitch Energy: 0.15nV-s

? Internal Reference:

– 2.5V Reference Voltage (enabled by default)

– 0.004% Initial Accuracy (typ)

– 2ppm/°C Temperature Drift (typ)

– 5ppm/°C Temperature Drift (max)

– 20mA Sink/Source Capability

? Power-On Reset to Zero-Scale or Mid-Scale

? Asynchronous Clear to Zero-Scale or

Mid-Scale

? Ultra-Low Power Operation: 1mA at 5V

? Wide Power Supply Range: +2.7V to +5.5V

? 14-Bit Monotonic Over Temperature Range

? Settling Time: 10μs to ±0.006% Full-Scale

Range (FSR)

? Low-Power Serial Interface with

Schmitt-Triggered Inputs: Up to 50MHz

? On-Chip Output Buffer Amplifier with

Rail-to-Rail Operation

? 1.8V to 5.5V Logic Compatibility

? Temperature Range: –40°C to +105°C

APPLICATIONS

? Portable Instrumentation

? Closed-Loop Servo-Control

? Process Control, PLCs

? Data Acquisition Systems

? Programmable Attenuation

? PC Peripherals

DESCRIPTION

The DAC8165 is a low-power, voltage-output,

four-channel, 14-bit digital-to-analog converter (DAC).

The device includes a 2.5V, 2ppm/°C internal

reference (enabled by default), giving a full-scale

output voltage range of 2.5V. The internal reference

has an initial accuracy of 0.004% and can source up to 20mA at the VREFH/VREFOUT pin. The device is

monotonic, provides very good linearity, and

minimizes undesired code-to-code transient voltages

(glitch). The DAC8165 uses a versatile 3-wire serial

interface that operates at clock rates up to 50MHz.

The interface is compatible with standard SPI?,

QSPI?, Microwire?, and digital signal processor

(DSP) interfaces.

The DAC8165 incorporates a power-on-reset circuit

that ensures the DAC output powers up at either

zero-scale or mid-scale until a valid code is written to the device. The device contains a power-down

feature, accessed over the serial interface, that

reduces the current consumption of the device to

1.3μA at 5V. Power consumption is 2.6mW at 3V,

reducing to 1.4μW in power-down mode. The low

power consumption, internal reference, and small

footprint make this device ideal for portable,

battery-operated equipment.

The DAC8165 is drop-in and functionally compatible

with the DAC7565 and DAC8565, and functionally

compatible with the DAC7564, DAC8164 and

DAC8564. All these devices are available in a

TSSOP-16 package.