USB DRIVER CUSTOMIZATION

Introduction The information in this document and the associated software download is intended for use by developers creating USB products based on the CP210x USB-to UART Bridge Controller device family or the C8051F32x, C8051F34x, C8051F38x, C8051T32x, and C8051T62x USB MCU device families A V

文件：452.76 Kbytes 頁數：8 Pages

SILABS

芯科科技

Data format: 8 data bits, 1 stop bit Parity: Even, Pdd, No parity Baud rates: 2400 bps to 921600 bps

System Overview The CP2105 is a highly-integrated USB-to-Dual-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of componentsand PCB space. The CP2105 includes a USB 2.0 full speed function controller, USB transceiver, oscillator, one-time pro

文件：206.89 Kbytes 頁數：24 Pages

SILABS

芯科科技

SINGLE-CHIP USB TO DUAL UART BRIDGE

Single-Chip USB to Dual UART Data Transfer ?Integrated USB transceiver; no external resistors required ?Integrated clock; no external crystal required ?Integrated 296-Byte One-Time Programmable ROM for storing customizable product information ?On-chip power-on reset circuit ?On-chip voltage

文件：1.72333 Mbytes 頁數：24 Pages

SILABS

芯科科技

DEVICE CUSTOMIZATION GUIDE

文件：322.51 Kbytes 頁數：30 Pages

SILABS

芯科科技

DEVICE CUSTOMIZATION GUIDE

文件：745.3 Kbytes 頁數：45 Pages

SILABS

芯科科技

PROGRAMMERS GUIDE

文件：156.96 Kbytes 頁數：36 Pages

SILABS

芯科科技

經典 USB 橋接器

CP2105 USB 至雙 UART 橋提供完整的即插即用接口解決方案，并包括免版稅驅動程序。這款符合 USB 2.0 規范的設備包括 5 個數字 I/O 引腳，并采用 4 x 4 mm QFN24 封裝。\n\n 下載 USB 至 UART 橋 VCP 驅動程序 >\n\n \n\n

Silicon Labs

芯科

SINGLE-CHIP USB TO DUAL UART BRIDGE

Single-Chip USB to Dual UART Data Transfer ?Integrated USB transceiver; no external resistors required ?Integrated clock; no external crystal required ?Integrated 296-Byte One-Time Programmable ROM for storing customizable product information ?On-chip power-on reset circuit ?On-chip voltage

文件：1.72333 Mbytes 頁數：24 Pages

SILABS

芯科科技

SINGLE-CHIP USB TO DUAL UART BRIDGE

Single-Chip USB to Dual UART Data Transfer ?Integrated USB transceiver; no external resistors required ?Integrated clock; no external crystal required ?Integrated 296-Byte One-Time Programmable ROM for storing customizable product information ?On-chip power-on reset circuit ?On-chip voltage

文件：1.72333 Mbytes 頁數：24 Pages

SILABS

芯科科技

Data format: 8 data bits, 1 stop bit Parity: Even, Pdd, No parity Baud rates: 2400 bps to 921600 bps

System Overview The CP2105 is a highly-integrated USB-to-Dual-UART Bridge Controller providing a simple solution for updating RS-232 designs to USB using a minimum of componentsand PCB space. The CP2105 includes a USB 2.0 full speed function controller, USB transceiver, oscillator, one-time pro

文件：206.89 Kbytes 頁數：24 Pages

SILABS

芯科科技