Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers

General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifers. These amplifers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positi

文件：2.62337 Mbytes 頁數(shù)：19 Pages

EXAR

艾科嘉

Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifier with Disable

The CLC1015 is a low cost, voltage feedback amplifier with disable. This amplifier is designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positive rail.The CLC1015 offers superior dynamic performance with 260MHz sma ? 260MHz bandwidth\n? Fully specified at +2.7V and +5V supplies\n? Output voltage range: 0.036V to 4.953V; VS = +5; RL = 2kΩ\n? Input voltage range: -0.3V to +3.8V; VS = +5\n? 145V/μs slew rate\n? 4.2mA supply current\n? Power down to 127μA\n? ±55mA linear output current\n? ±85mA short circuit curre;

RESURGENT

Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers

General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifers. These amplifers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positi

文件：2.62337 Mbytes 頁數(shù)：19 Pages

EXAR

艾科嘉

Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers

General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifers. These amplifers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positi

文件：2.62337 Mbytes 頁數(shù)：19 Pages

EXAR

艾科嘉

Low Cost, 2.7V to 5.5V, 260MHz Rail-to-Rail Amplifiers

General Description The CLC1005 (single), CLC1015 (single with disable), and CLC2005 (dual) are low cost, voltage feedback amplifers. These amplifers are designed to operate on +2.7V to +5V, or ±2.5V supplies. The input voltage range extends 300mV below the negative rail and 1.2V below the positi

文件：2.62337 Mbytes 頁數(shù)：19 Pages

EXAR

艾科嘉