CH7216A中文資料Video Converter數據手冊Chrontel規格書

描述 Description

Chrontel’s CH7216A is a low-cost, low-power semiconductor device that translates the DisplayPort signal to HDMI/DVI through the USB Type-C connector.This innovative USB Type-C based DisplayPort receiver with an integrated HDMI Transmitter is specially designed to target the USB Type-C to HDMI converter,adapter and dongle device. Through the CH7216A’s advanced decoding / encoding algorithm, the input DisplayPort high-speed serialized multimedia data can beseamlessly converted to HDMI/DVI output. The CH7216A’s DP/eDP receiver is compliant with the DisplayPort Specification 1.3 and Embedded DisplayPort (eDP) Specification version 1.4. With sophisticated DisplayPort signal detection and the Lane Swap/AUX polarity inversion logic, the CH7216A supports USB Type-C cable plug orientation switch. With internal HDCP key Integrated, the device support HDCP 2.2 specifications. In the device’s receiver block, which supports four DisplayPort Main Link Lanes input with data rate running at 1.62Gbps, 2.7Gbps, 5.4Gbps or 8.1Gpbs, and converted the input signal to HDMI output up to 4Kx2k@60Hz. Leveraging the USB Power Delivery control logic, the USB billboard module for USB device indentify and DisplayPort’s unique source/sink “Link Training” routine, the CH7216A is capable of instantly bring up the video display to the HDMI/DVI TV/Monitor when the initialization process is completed.With sophisticated MCU and the embedded EEPROM,CH7216A supports auto-boot and EDID buffer.Leveraging the firmware auto-loaded from the embeddedEEPROM, CH7216A can support DP input detection,HDMI connection detection, and determine to enter into Power saving mode automatically.

特性 Features

·?Compliant with DisplayPort Alternate Mode on USB Type C standard
·?Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version 1.4
·?Support up to 4 Main Link Lanes at 1.62Gbps,2.7Gbps? (HBR), 5.4Gbps (HBR2), or 8.1Gbps (HBR3) link rate
·?Automotive DP input signal detection and Lane swap supported for compliance with the USB type C cable plug orientation switch
·?DP_BR signaling modes supported
·?Programmable DisplayPort receiver equalization supported for the compensation of input signal attenuation
·?Support Spread Spectrum Clocking (de-spreading) for EMI reduction
·?Support Fast and full Link Training
·?Support eDP Authentication: Alternative Scramble Seed Reset and Alternative Framing
·?HDMI transmitter compliant with HDMI specification version 2.0 and DVI specification version 1.0
·?HDMI transmitter supports up to 6.0Gbps data rate for video timing of 4Kx2K@60Hz
·?HDMI 3D dual view and 3D audio are supported
·?High-Dynamic-Range (HDR) display are supported
·?YCC 4:4:4/4:2:2 to YCC 4:2:2/4:2:0,Y-only(Gray display) conversion are supported
·?HDCP engine compliant with HDCP 2.2 specification with internal HDCP Keys
·?HDCP 2.2 repeater supported
·?Active DDC buffer and related control register integrated
·?SCDC supported on HDMI DDC
·?IIC-over-AUX transaction supported
·?AUX CH polarity inversion supported for USB type C cable plug orientation switch
·?Programmable Pre-Emphasis on output driver supported
·?USB Type-C port compliant with USB Type-C Cable and Connector Specification revision 1.3.
·?Compliant with USB Power Delivery Specification Revision 3.0, Version 1.1, with USB Power Delivery BMC transceiver integrated on USB Type-C port
·?Integrated Ra, Rd and Rp for USB Type-C
·?Embedded MCU to handle the control logic
·?Full speed USB billboard module supported with USB 2.0 PHY integrated
·?Embedded EEPROM, integrated EDID Buffer
·?IIC Slave, USB 2.0 are available for firmware update
·?IIC slave interface are available for debug
·?Low power architecture, support Auto Power Saving mode and low stand-by current
·?Anti-back drive support
·?RoHS compliant and Halogen free package
·Offered in 64 pin QFN package