PWM pulse Generator for LCD Panels

文件：725.84 Kbytes 頁數：15 Pages

ROHM

羅姆

White LED Driver for large LCD Panels (DCDC Converter type)

文件：862.31 Kbytes 頁數：29 Pages

ROHM

羅姆

White LED Driver for large LCD Panels (DCDC Converter type)

文件：1.12772 Mbytes 頁數：30 Pages

ROHM

羅姆

White LED Driver for large LCD Panels (DCDC Converter type)

文件：862.31 Kbytes 頁數：29 Pages

ROHM

羅姆

White LED Driver for large LCD Panels (DCDC Converter type)

文件：1.12772 Mbytes 頁數：30 Pages

ROHM

羅姆

isc Silicon NPN Power Transistor

文件：115.95 Kbytes 頁數：2 Pages

ISC

無錫固電

中型、大型LCD背光用白色LED驅動器

BD9470AFM是白色LED用高效率驅動器，適用于大屏幕液晶驅動器。BD9470AFM內置了可向光源（LED串聯連接的陣列）提供適當電壓的DCDC轉換器。BD9470AFM內置了過電壓保護（OVP: over voltage protection）、過電流檢測（OCP: over current limit protection of DCDC）、短路電路保護（SCP: short circuit protection）、開路保護（open detection of LED string）等針對異常狀態的保護功能。因此，可在更寬的輸出電壓條件及負載條件下使用。 · 6chLED constantcurrent driver\n · LED maximum output current 250mA\n · Individual PWM dimming modulation allowed for LEDs\n · ±2%LED current accuracy (when eachLED is set to 130mA)\n · Built-inLED feedback voltage automatic adjustment circuit according toLED current \n · Built-in start-up circ;

ROHM

羅姆

LCD面板用PWM信號生成器

BD9478F是LCD面板用PWM信號生成器。此IC通過對IC內部產生的三角波與外部DC信號進行比較，生成PWM信號。此PWM信號提供給LED驅動器，對LED調光進行控制。PWM脈沖頻率與輸入到SYNC端子的外部信號頻率同步。當此頻率超過規定范圍時，則在設定頻率內動作以進行保護，并常時向LED驅動器提供穩定的PWM脈沖。 ? The signal that the frequency synchronizes with the VSYNC signal is output to PWMOUT. \n? The PWM pulse is generated with the DC signal of a triangular wave and PDIM generated with the LCT capacitor. \n? When the VSYNC frequency exceeds the stipulated range, it fixes by a set frequency. (fSYNC fPL;

ROHM

羅姆

（DCDC型）面向大屏幕的白色LED驅動器

BD9479FV是白色LED用高效率驅動器，適用于大屏幕液晶驅動器。BD9479FV內置了可向光源（LED串聯連接的陣列）提供適當電壓的DCDC轉換器。\n\nBD9479FV中內置了應對異常狀態的幾種保護功能。過電壓保護（OVP: over voltageprotection ） 、過電流檢測（OCP: over current limitprotection of DCDC）、短路電路保護（SCP: short circuitprotection）、開路保護（open detection of LEDstring）等。因此，可在更寬的輸出電壓條件及負載條件下使用。 ? 8ch LED constant current driver (external PNP Tr Type)\n? Maximum LED setting current 500mA (VREF pin setting)\n? Build-in DC/DC converter\n? Analog Dimming (Linear) function\n? Individual channel PWM Dimming function\n? LED protection function (Open Short protection) [PWM-independent Type]\n? Out;

ROHM

羅姆

Package：28-SOP（0.295"，7.50mm 寬）+ 2 熱凸片；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 類別：集成電路（IC） LED 驅動器 描述：IC LED DRV RGLTR PWM 28HSOP

ROHM

羅姆