1A Secondary LDO Regulators for Local Power Supplies

Description\nThe BA□□ BC0 are low-saturation regulators with an output current of 1.0 A and an output voltage accuracy of ?2%. A broad output voltage range is offered, from 1.5V to 10V, and built-in overcurrent protection and thermal shutdown (TSD) circuits prevent damage due to short-circuiting 1) Output current: 1 A (min.)\n2) Output voltage accuracy: ?2%\nBroad output range available: 1.5 V -10 V (BA□□ BC0 series)\n3) Low saturation-voltage type with PNP output\n4) Built-in overcurrent protection circuit\n5) Built-in thermal shutdown circuit\n6) Integrated shutdown switch (BA□□ BC0WT;

ROHM

羅姆

1A Secondary LDO Regulators for Local Power Supplies

文件：392.78 Kbytes 頁數(shù)：10 Pages

ROHM

羅姆

1A Secondary LDO Regulators for Local Power Supplies

文件：392.78 Kbytes 頁數(shù)：10 Pages

ROHM

羅姆

LDO Regulator With Shutdown Circuit

Description BA00BC0WF is a PNP output LDO regulator IC with the output current of 0.5A and a voltage accuracy of ± 2. Output voltage can be set (1.5V to 12V) by external resistor. Over-current protection circuit and thermal protection circuit are incorporated to prevent IC from being damaged

文件：126.39 Kbytes 頁數(shù)：2 Pages

ROHM

羅姆

1.0A Low-Dropout Voltage Regulator with Shut down Switch (Adjustable)

General Description The BAxxBC0 are low-saturation regulators with an output current of 1.0 A and an output voltage accuracy of ±2. A broad output voltage range is offered, from 1.5V to 10V, and built-in overcurrent protection and thermal shutdown (TSD) circuits prevent damage due to short-circui

文件：343.18 Kbytes 頁數(shù)：6 Pages

ROHM

羅姆