Accessories Hardware

[NKK Switches] Hardware Threading Many hardware pieces are available in both metric and inch threading, and in such cases M (metric) and H (inch) are noted in the descriptions. The customer must select threading by placing an M or H after the basic AT part number. If the hardware is available

文件：3.43102 Mbytes 頁數：34 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

Accessories Hardware

文件：3.62022 Mbytes 頁數：33 Pages

ETCList of Unclassifed Manufacturers

未分類制造商

USB HUB CONTROLLER

Description The AT43301 is a 5-port USB hub chip supporting one upstream and four down stream ports. The AT43301 connects to an upstream hub or host/root hub via Port0, while the other ports connect to external downstream USB devices. The hub re-trans mits the USB differential signal between Po

文件：16.51 Kbytes 頁數：2 Pages

ATMEL

愛特梅爾

USB Hub

Description The AT43310 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43310 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features ? Bus Powered Hub Controller

文件：247.53 Kbytes 頁數：25 Pages

ATMEL

愛特梅爾

USB Hub

Description The AT43311 is a fully compliant USB hub chip with 5 ports, one upstream port and four full/low-speed downstream ports. The AT43311 can be used as a stand alone or can provide a simple and quick method of adding USB ports to an existing device. Features ? Self-Powered Hub with Bus P

文件：136.5 Kbytes 頁數：24 Pages

ATMEL

愛特梅爾

Self- and Bus- Powered USB Hub Controller

Description The AT43312 is a 5 port USB hub chip supporting one upstream and four downstream ports. The AT43312 connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0 and

文件：157.98 Kbytes 頁數：21 Pages

ATMEL

愛特梅爾

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

文件：206.84 Kbytes 頁數：27 Pages

ATMEL

愛特梅爾

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

文件：206.84 Kbytes 頁數：27 Pages

ATMEL

愛特梅爾

Self and buspowered USB Hub Controller

Introduction The AT43312A is a 5 port USB hub chip supporting one upstream and four down stream ports. The AT43312A connects to an upstream hub or Host/Root Hub via Port0 and the other ports connect to external downstream USB devices. The hub re-transmits the USB differential signal between Port0

文件：206.84 Kbytes 頁數：27 Pages

ATMEL

愛特梅爾

Full-speed USB Hub/Function Microcontroller

Overview The Atmel AT43320 is a microcontroller-based USB hub with an embedded function. The USB hub has five downstream ports, one of which is permanently attached. Internally the AT43320 consists of a USB hub and function interface, a hub repeater, and a high-performance, efficient 8-bit RISC m

文件：60.88 Kbytes 頁數：4 Pages

ATMEL

愛特梅爾