SINGLE CHANNEL SLEW RATE CONTROLLED LOAD SWITCH

文件：286.81 Kbytes 頁數：9 Pages

DIODES

美臺半導體

Single Channel Slew Rate Controlled Load Switch

文件：304.26 Kbytes 頁數：12 Pages

DIODES

美臺半導體

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

文件：552.05 Kbytes 頁數：14 Pages

DIODES

美臺半導體

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

文件：552.05 Kbytes 頁數：14 Pages

DIODES

美臺半導體

SINGLE CHANNEL POWER DISTRIBUTION LOAD SWITCH

文件：552.05 Kbytes 頁數：14 Pages

DIODES

美臺半導體

Single Channel Slew Rate Controlled Load Switch

文件：304.26 Kbytes 頁數：12 Pages

DIODES

美臺半導體

SINGLE CHANNEL SLEW RATE CONTROLLED LOAD SWITCH

文件：286.81 Kbytes 頁數：9 Pages

DIODES

美臺半導體

Single Channel Slew Rate Controlled Load Switch

文件：304.26 Kbytes 頁數：12 Pages

DIODES

美臺半導體

single-channel-usb-switch

The AP22802 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input.\n\n\tThe device has fast short-circuit

Diodes

美臺半導體

Single Channel Power Distribution Load Switch

The AP22804 / AP22814 is a single channel current-limited integrated high-side power switch optimized for Universal Serial Bus (USB) and other hot-swap applications. The family of devices complies with USB standards and is available with both polarities of Enable input.The device has fast short-circ Input Voltage Range: 2.7V ~ 5.5V\n50mΩ on-resistance\nBuilt-in soft-start with 0.6ms typical rise time\nFault report (FLG) with blanking time (6ms typ)\nESD protection: 2KV HBM, 200V MM\nActive low (B) or active high (A) enable\nProtection:Overcurrent with Auto Recovery\nShort Circuit with Auto Reco;

Diodes

美臺半導體