200uH, 20%, 34.5mOhm, 5.4Amp Max. DIP Toroidal Inductor

150uH to 300uH, 20% , 25.1mOhm to 59.5mOhm, 10Amp to 7.5Amp DIP Toroidal Inductor. ? Sendust core is used to realize lower core loss.\n? No thermal aging concerns.\n? Low leakage magnetic flux.\n? Elimination for impulse (EMI) noise.\n? Ideally used as Power Factor Correction choke.\n? Also can be used as boost inductor in power supplies.\n? ?33.0 × 33.0 x 18.0mm Max.Custom values;

ITG

300uH, 20%, 49.5mOhm, 4.2Amp Max. DIP Toroidal Inductor

150uH to 300uH, 20% , 25.1mOhm to 59.5mOhm, 10Amp to 7.5Amp DIP Toroidal Inductor. ? Sendust core is used to realize lower core loss.\n? Low leakage magnetic flux.\n? Ideally used as Power Factor Correction choke.\n? ?33.0 × 33.0 x 18.0mm Max.Custom values are welcomed.\n? Operating Temperature Range -55°C to + 130°C; RoHs & HF compliance.\n;

ITG

SMALL MICRO WAVE RELAY

文件：86.78 Kbytes 頁數：3 Pages

NAIS

松下電器

8-Digit LED Display Drivers

General Description The AS1106 and the AS1107 are compact display drivers for 7-segment numeric displays of up to 8 digits. The devices can be programmed via SPI, QSPI, and Microwire as well as a conventional 4-wire serial interface. The devices include an integrated BCD code-B/HEX decoder, mul

文件：698.27 Kbytes 頁數：20 Pages

AMSCO

艾邁斯歐司朗

8-Digit LED Display Drivers

文件：656.38 Kbytes 頁數：20 Pages

AMSCO

艾邁斯歐司朗