Thyristor - Diode Measurement With A Multimeter

SUMMARY A multimeter resistance measurement is not recommended for determining acceptable semiconductor devices. As a quick check for devices in a circuit, a multimeter will allow you to determine if a device has failed catastrophically. The device with the lowest leakage current at 3V is not nec

文件：47.07 Kbytes 頁數(shù)：2 Pages

DYNEX

Thyristor - Diode Measurement With A Multimeter

Dynex

丹尼克斯

AX4853 Single Channel 1.5W/Stereo Headset 300mW Audio Amplifier

文件：820.95 Kbytes 頁數(shù)：14 Pages

YONGFUKANG

永?？?/p>

Standard CMOS Voltage Detector IC

文件：269.09 Kbytes 頁數(shù)：10 Pages

ROHM

羅姆

Standard CMOS Voltage Detector IC

Description ROHM’s BD48□□G/FVE and BD49□□G/FVE series are highly accurate, low current consumption reset IC series. The lineup was established with tow output types (Nch open drain and CMOS output) and detection voltages range from 2.3V to 6.0V in increments of 0.1V, so that the series may be sel

文件：507.55 Kbytes 頁數(shù)：18 Pages

ROHM

羅姆