1MHz Step-Up PWM Converter with 5.5A Switch Current

The AN3202 is a current-mode boost DC/DC converter with a 5.5A, 0.1Ω internal power MOSFET to provide this regulator highly power efficient. The AN3202 operates at 1MHz allowing for easy filtering and low noise. Internal compensation makes the user to set system easily, which allows the use of small ? Adjustable Output Voltage up to 12V\n? Internal 0.1Ω, 5.5A, 18V Power MOSFET\n? Internal Soft-Start\n? Fixed 1MHz Switching Frequency\n? Current Mode Operation\n? 12V Output at 1A from 5V Input for AN3202\n? Cycle-by-Cycle current limit\n? Adjustable Over Current Protection\n? Input Under Voltage ;

AnaNaviTek

諾肯

How to configure the SPEAr600 general purpose timers

文件：167.67 Kbytes 頁數(shù)：11 Pages

STMICROELECTRONICS

意法半導體

380kHz, 2A Asynchronous DC-DC Buck Converter

General Description The AP3202 is a 380kHz fixed frequency, current mode, PWM buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation. The device integrates N-channel power MOSFET switch with low on-resistance. Current mode control

文件：556.82 Kbytes 頁數(shù)：11 Pages

BCDSEMI

新進半導體

Li Battery Charger with Thermal Regulation

General Description The APL3202 is a constant-current/constant-voltage linear charger for single cell Li+ batteries. TheAPL3202 needs no external MOSFET s or diodes, and accepts in put voltages up to 6.5V. The small package and low ex ternal component counts make the APL3202 an idea part

文件：275.18 Kbytes 頁數(shù)：18 Pages

ANPEC

茂達電子

Li Battery Charger with Thermal Regulation

General Description The APL3202 is a constant-current/constant-voltage linear charger for single cell Li+ batteries. TheAPL3202 needs no external MOSFET s or diodes, and accepts in put voltages up to 6.5V. The small package and low ex ternal component counts make the APL3202 an idea part

文件：275.18 Kbytes 頁數(shù)：18 Pages

ANPEC

茂達電子