Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

文件：212.6 Kbytes 頁數：12 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply ?7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

文件：385.88 Kbytes 頁數：16 Pages

AD

亞德諾

低功耗、限擺率RS-485收發器

ADM488和ADM489均為低功耗差分線路收發器，適用于多點總線傳輸線路通信。?????這些器件主要用于平衡數據傳輸，符合EIA標準RS-485和RS-422。兩款產品均內置一個單通道差分線路驅動器和一個單通道差分線路接收器，適用于全雙工數據傳輸。?????ADM489還提供接收器和驅動器使能控制功能。?????輸入阻抗為12 kΩ，允許一條總線上連接32個收發器。?????ADM488/ADM489采用+5 V ± 10%單電源供電。熱關斷電路可防止總線競爭或輸出短路導致功耗過大。故障條件下，如果檢測到內部驅動器電路的溫度顯著升高，此特性將強制驅動器輸出進入高阻抗?fàn)顟B(tài)。?????如 ? 符合EIA RS-485標準\n\n? 數據速率：250 kbps\n\n? 5 V ± 10%單電源\n\n? 5 V ± 10%單電源\n\n? 輸入阻抗：12 kΩ;

ADI

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply ?7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

文件：385.88 Kbytes 頁數：16 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply ?7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

文件：304.91 Kbytes 頁數：16 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

文件：287.37 Kbytes 頁數：16 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply ?7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

文件：304.91 Kbytes 頁數：16 Pages

AD

亞德諾

絲?。?a target="_blank" title="Marking" href="/f0f/marking.html">F0F；Package：MSOP；Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply ?7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

文件：304.91 Kbytes 頁數：16 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

文件：287.37 Kbytes 頁數：16 Pages

AD

亞德諾

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E

文件：287.37 Kbytes 頁數：16 Pages

AD

亞德諾