16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 頁數：16 Pages

AD

亞德諾

Ultralow Noise Amplifier at Lower Power

FEATURES Ultralow noise: 2.8 nV/√Hz at 1 kHz typical Ultralow distortion: 0.0002% typical Low supply current: 1.8 mA per amplifier typical Offset voltage: 1 mV maximum Bandwidth: 6.5 MHz typical Slew rate: 12 V/μs typical Dual-supply operation: ±4.5 V to ±18 V Unity-gain stable Extended

文件：1.0978 Mbytes 頁數：24 Pages

AD

亞德諾

16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 頁數：16 Pages

AD

亞德諾

Ultralow Noise Amplifier at Lower Power

文件：1.57654 Mbytes 頁數：24 Pages

AD

亞德諾

16 V, 4 MHz RR0 Amplifiers

文件：621.68 Kbytes 頁數：16 Pages

AD

亞德諾

16V、4Mhz、軌到軌輸出雙通道運算放大器

AD866x系列均為單電源、低噪聲、軌到軌輸出放大器，具有最高16 V的寬工作電壓范圍，另外還具有低輸入偏置電流、寬信號帶寬以及低輸入電壓和電流噪聲等特性。如需更低的失調電壓，請選擇AD8661/AD8662/AD8664系列。\n\n 低失調、極低輸入偏置電流和寬電源電壓范圍特性相結合，使這些放大器適合各種通常需要較昂貴JFET放大器的低成本應用。諸如光電二極管等采用高阻抗傳感器的系統，均可受益于低輸入偏置電流、低噪聲、低失調和寬帶寬等特性組合優勢。寬工作電壓范圍也符合高性能ADC和DAC的要求。高輸入阻抗、低電壓和電流噪聲、寬帶寬以及無爆米花噪聲（其它許多低輸入偏置電流放大器中存 ? 失調電壓：2.5 mV（最大值）\n\n? 低輸入偏置電流：1 pA（最大值）\n\n? 單電源供電：5 V至16 V\n\n? 雙電源供電：±2.5 V至±8 V\n\n? 低噪聲：8 nV/√Hz (10 kHz)\n\n? 寬帶寬：4 MHz\n\n? 軌到軌輸出\n\n? 單位增益穩定\n\n? 無鉛封裝\n\n? 通過汽車應用認證;

ADI

亞德諾

絲?。?a target="_blank" title="Marking" href="/a16/marking.html">A16；Package：MSOP；16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 頁數：16 Pages

AD

亞德諾

16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 頁數：16 Pages

AD

亞德諾

16 V, 4 MHz Rail-to-Rail Output Amplifiers

GENERAL DESCRIPTION The AD866x family are single supply, rail-to-rail output amplifiers with low noise performance featuring an extended operating range with supply voltages up to 16 V. They also feature low input bias currents, wide signal bandwidth, and low input voltage and current noise. Fo

文件：524.79 Kbytes 頁數：16 Pages

AD

亞德諾

絲?。?a target="_blank" title="Marking" href="/a16/marking.html">A16；Package：MSOP；16 V, 4 MHz RR0 Amplifiers

FEATURES Offset voltage: 2.5 mV max Low input bias current: 1 pA max Single-supply operation: 5 V to 16 V Dual-supply operation: ±2.5 V to ±8 V Low noise: 8 nV/√Hz @ 10 kHz Wide bandwidth: 4 MHz Rail-to-rail output Unity-gain stable Lead-free packaging AD8666/AD8668 qualified for automot

文件：621.13 Kbytes 頁數：16 Pages

AD

亞德諾