Single Supply, Rail-to-Rail Low Power FET-Input Op Amp

GENERAL DESCRIPTION The AD822 is a dual precision, low power FET input op amp that can operate from a single supply of 3.0 V to 36 V or dual supplies of ±1.5 V to ±18 V. It has true single-supply capability with an input voltage range extending below the negative rail, allowing the AD822 to acc

文件：320.84 Kbytes 頁數：16 Pages

AD

亞德諾

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 30 V Dual-supply capability from ±2.5 V to ±15 V High load drive Capacitive load drive of 350 pF, G = +1 Minimum output current of 15 mA Excellent

文件：523.63 Kbytes 頁數：24 Pages

AD

亞德諾

Low Noise, Precision, Rail-to-Rail Output, JFET Single/Dual/Quad Op Amps

FEATURES Low offset voltage B grade: 0.4 mV maximum (ADA4610-1/ADA4610-2 only) A grade: 1 mV maximum Low offset voltage drift B grade: 2 μV/°C maximum (ADA4610-1/ADA4610-2 only) A grade: 8 μV/°C maximum (SOIC, MSOP, LFCSP packages) Low input bias current: 5 pA typical Dual-supply operation

文件：1.10341 Mbytes 頁數：27 Pages

AD

亞德諾

MicroConverter? 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes 頁數：88 Pages

AD

亞德諾

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

文件：595.52 Kbytes 頁數：28 Pages

AD

亞德諾

單電源、軌到軌、低功耗、FET輸入雙通道運算放大器

AD822是一款雙通道、精密、低功耗、FET輸入運算放大器，可以采用5 V至30 V單電源或±2.5 V至±15 V雙電源供電。該放大器具有單電源供電能力，輸入電壓范圍可擴展至負供電軌以下，因此它在單電源模式下可以處理地電壓以下的輸入信號。輸出電壓擺幅可擴展至各供電軌10 mV以內，以提供最大的輸出動態范圍。\n\n 直流精度性能包括最大800 μV的失調電壓、2 μV/°C的失調電壓漂移、小于25 pA的輸入偏置電流以及低輸入電壓噪聲，源阻抗最高可達1 GΩ。單位增益帶寬為1.8 MHz，10 kHz時總諧波失真（THD）為–93 dB，壓擺率為3 V/μs，每個放大器的電源電流低 ? 真正的單電源供電\n? 軌到軌輸出擺幅\n\n? 輸入電壓范圍擴展至地電壓以下\n\n? 5 V至30 V單電源供電能力\n\n? 雙電源供電：±2.5 V至±15 V\n\n\n\n\n? 高負載驅動能力\n? 350 pF、G = +1的容性負載驅動能力\n\n? 最小輸出電流：15 mA\n\n\n\n\n? 欲了解更多特性，請參考數據手冊\n\n\nAD822-EP支持防務和航空航天應用（AQEC標準）\n? 下載AD822-EP數據手冊(pdf)\n\n? 軍用溫度范圍（?55℃至+125℃）\n\n? 受控制造基線\n\n? 封裝/測試廠\n\n? 制造廠\n\n? 增強型產品;

ADI

亞德諾

Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp

FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 30 V Dual-supply capability from ±2.5 V to ±15 V High load drive Capacitive load drive of 350 pF, G = +1 Minimum output current of 15 mA Excellent

文件：523.63 Kbytes 頁數：24 Pages

AD

亞德諾

JFET Input Instrumentation Amplifier with Rail-to-Rail Output in MSOP Package

GENERAL DESCRIPTION The AD8220 is the first single-supply JFET input instrumentation amplifier available in an MSOP package. Designed to meet the needs of high performance, portable instrumentation, the AD8220 has a minimum common-mode rejection ratio (CMRR) of 86 dB at dc and a minimum CMRR of

文件：1.07975 Mbytes 頁數：28 Pages

AD

亞德諾

Precision, Dual-Channel Instrumentation Amplifier

GENERAL DESCRIPTION The AD8222 is a dual-channel, high performance instrumentation amplifier that requires only one external resistor per amplifier to set gains of 1 to 10,000. The AD8222 is the first dual-instrumentation amplifier in the small 4 mm × 4mm LFCSP. It requires the same board area a

文件：595.66 Kbytes 頁數：24 Pages

AD

亞德諾

Low Noise, Low Gain Drift, G = 2000 Instrumentation Amplifier

GENERAL DESCRIPTION The AD8428 is an ultralow noise instrumentation amplifier designed to accurately measure tiny, high speed signals. It delivers industry-leading gain accuracy, noise, and bandwidth. All gain setting resistors for the AD8428 are internal to the part and are precisely matched. C

文件：378.74 Kbytes 頁數：20 Pages

AD

亞德諾