Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

文件：425.43 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

文件：605.93 Kbytes 頁數：24 Pages

AD

亞德諾

單位增益穩定—低失真、寬帶寬、電壓反饋型箝位放大器

AD8036和AD8037均是寬帶寬、低失真箝位放大器。AD8036為單位增益穩定型，AD8037則是在增益為2或更大時保持穩定。這些器件允許設計人員指定高(VCH)和低(VCL)輸出箝位電壓。輸出信號將箝位在這些指定的電平。AD8036和AD8037采用正在申請專利的獨特CLAMPIN?輸入箝位架構，與傳統輸出箝位器件相比，其箝位性能提高10倍。具體而言，箝位誤差典型值為3 mV或更小，箝位區失真極低。這兩款產品既可以用作經典運算放大器，也可以用作指定高、低輸出電壓的箝位放大器。\n\n使用電壓反饋型架構的AD8036和AD8037達到了以前依賴電流反饋型放大器的許多應用的要求。這兩款器件具 ? 出色的箝位特性\n箝位誤差：3 mV\n過驅恢復：1.5 ns\n箝位輸入帶寬：240 MHz\n箝位輸入范圍：±3.9 V \n\n? 寬帶寬AD8036、AD8037\n小信號帶寬：240 MHz、270 MHz\n大信號帶寬(4 V峰峰值)：195 MHz、190 MHz \n\n? 采用±3 V至±5 V電源供電\n\n? 良好的直流特性\n失調電壓：2 mV\n失調漂移：10 μV/°C \n\n? 超低失真、低噪聲\n–72 dBc(典型值，20 MHz)\n輸入電壓噪聲：4.5 nV/√Hz\n\n? 高速\n壓擺率：1500 V/μs\n0.1%建立時間：10 ns;

ADI

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾

Low Distortion, Wide Bandwidth Voltage Feedback Clamp Amps

PRODUCT DESCRIPTION The AD8036 and AD8037 are wide bandwidth, low distortion clamping amplifiers. The AD8036 is unity gain stable. The AD8037 is stable at a gain of two or greater. These devices allow the designer to specify a high (VCH) and low (VCL) output clamp voltage. The output signal will

文件：387.73 Kbytes 頁數：23 Pages

AD

亞德諾