2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

文件：247.4 Kbytes 頁數：16 Pages

AD

亞德諾

16-Bit, 250 kSPS PulSAR ADC in MSOP/QFN

GENERAL DESCRIPTION The AD7685 is a 16-bit, charge redistribution successive approximation, analog-to-digital converter (ADC) that operates from a single power supply, VDD, between 2.3 V to 5.5 V. It contains a low power, high speed, 16-bit sampling ADC with no missing codes, an internal conversi

文件：484.14 Kbytes 頁數：28 Pages

AD

亞德諾

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, ?3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

文件：418.93 Kbytes 頁數：20 Pages

AD

亞德諾

2.7 V, 800 關A, 80 MHz Rail-to-Rail I/O Amplifiers

文件：430.12 Kbytes 頁數：20 Pages

AD

亞德諾

2.7 V、800 μA、80 MHz軌到軌輸入/輸出單路放大器

AD8031(單核)是一款單電源電壓反饋型放大器，具有高速特性，小信號帶寬為80 MHz，壓擺率為30 V/μs，建立時間為125 ns。實現以上特性采用+5 V單電源供電時，功耗小于4.0 mW。這一低功耗特性可以在不犧牲動態性能的情況下延長高速、電池供電系統的工作時間。AD8031采用單電源供電，具有軌到軌輸入和輸出特性，額定電源電壓為+2.7 V、+5 V和±5 V。輸入電壓范圍可以擴展至各供電軌以外500 mV。輸出電壓擺幅為各供電軌20 mV以?xún)?nèi)，以提供最大的輸出動態范圍。AD8031還能提供出色的信號質量，而每放大器電源電流僅為800μA。采用+5 V電源時，對于2 V峰峰值、1 ? 低功耗\n每放大器電源電流800 μA\n額定電源電壓：+2.7 V、+5 V和 ±5 V\n\n? 高速及快速建立(5 V)\n–3 dB帶寬：80 MHz (G = +1)\n壓擺率：30 V/μs\n0.1%建立時間：125 ns \n\n? 輸出電流：15 mA\n\n? 高等級選項\nVOS(最大值)= 1.5 mV\n\n? 軌到軌輸入和輸出\n輸入高于電源電壓0.5 V不會反相\n輸入共模電壓范圍擴展至供電軌200 mV以外\n輸出擺幅為任一供電軌20 mV以?xún)?nèi)\n\n? 低失真\n–62 dB(1 MHz，VO = 2 V峰峰值)\n–86 dB(100 kHz，V;

ADI

亞德諾

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, ?3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

文件：418.93 Kbytes 頁數：20 Pages

AD

亞德諾

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

文件：247.4 Kbytes 頁數：16 Pages

AD

亞德諾

2.7 V, 800 uA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

文件：247.4 Kbytes 頁數：16 Pages

AD

亞德諾

2.7 V, 800 μA, 80 MHz Rail-to-Rail I/O Amplifiers

FEATURES Low power Supply current 800 μA/amplifier Fully specified at +2.7 V, +5 V, and ±5 V supplies High speed and fast settling on 5 V 80 MHz, ?3 dB bandwidth (G = +1) 30 V/μs slew rate 125 ns settling time to 0.1% Rail-to-rail input and output No phase reversal with input 0.5 V beyond

文件：418.93 Kbytes 頁數：20 Pages

AD

亞德諾

2.7 V, 800 muA, 80 MHz Rail-to-Rail I/O Amplifiers

GENERAL DESCRIPTION The AD8031 (single) and AD8032 (dual) single-supply, voltage feedback amplifiers feature high speed performance with 80 MHz of small signal bandwidth, 30 V/μs slew rate, and 125 ns settling time. This performance is possible while consuming less than 4.0 mW of power from a sin

文件：635.78 Kbytes 頁數：21 Pages

AD

亞德諾