Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 頁數：24 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ? High speed ? 190 MHz, ?3 dB bandwidth (G = +1) ? 100 V/μs slew rate ? Low distortion ? 120 dBc at 1 MHz SFDR ? 80 dBc at 5 MHz SFDR ? Selectable input crossover threshold ? Low noise ? 4.3 nV/√Hz ? 1.6 pA/√Hz ? Low offset voltage: 900 μV maximum ? Low power: 6.5 mA per ampli

文件：1.8029 Mbytes 頁數：27 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：612.87 Kbytes 頁數：24 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：699.19 Kbytes 頁數：25 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

文件：699.19 Kbytes 頁數：25 Pages

AD

亞德諾

低失真、高速軌到軌輸入/輸出放大器

AD8027/AD8028是具有軌到軌輸入和輸出的高速放大器，工作電壓低，并專門針對高性能和寬動態信號范圍進行了優化。 兩款器件具有低噪聲（4.3 nV/√Hz、1.6 pA/√Hz）和低失真（1 MHz時120 dBc）特性。 在使用一小部分或全部輸入動態范圍且要求低失真的應用中，AD8027/AD8028是理想之選。\n\n 當輸入信號超越某一閾值電壓時，許多軌到軌輸入放大器的輸入級便會從一個差分對切換到另一個差分對，這會引起失真。 AD8027/AD8028具有一個獨特的特性，允許用戶通過DISABLE/SELECT 引腳（采用10引腳MSOP封裝為DISABLE/SELECT ? 高速\n-3 dB帶寬：190 MHz (G = +1)\n壓擺率：100 V/μs\n\n? 低失真\nSFDR：120 dBc (1 MHz )\nSFDR：80 dBc (5 MHz )\n\n? 可選輸入交越閾值\n\n? 低噪聲：4.3 nV/√Hz，1.6 pA/√Hz\n\n? 低失調電壓： 900 μV（最大值）\n\n? 低功耗： 每個放大器電源電流：6.5 mA \n\n? 關斷模式 \n\n? 無相位反轉： VIN > |VS| + 200 mV \n\n? 寬電源電壓范圍： 2.7 V至12 V \n\n? 小型封裝： 8引腳SOIC、6引腳SOT-23、10引腳M;

ADI

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 頁數：24 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

FEATURES ? High speed ? 190 MHz, ?3 dB bandwidth (G = +1) ? 100 V/μs slew rate ? Low distortion ? 120 dBc at 1 MHz SFDR ? 80 dBc at 5 MHz SFDR ? Selectable input crossover threshold ? Low noise ? 4.3 nV/√Hz ? 1.6 pA/√Hz ? Low offset voltage: 900 μV maximum ? Low power: 6.5 mA per ampli

文件：1.8029 Mbytes 頁數：27 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 頁數：24 Pages

AD

亞德諾

Low Distortion, High Speed Rail-to-Rail Input/Output Amplifiers

GENERAL DESCRIPTION The AD8027/AD80281 are high speed amplifiers with rail-to-rail input and output that operate on low supply voltages and are optimized for high performance and wide dynamic signal range. The AD8027/AD8028 have low noise (4.3 nV/√Hz, 1.6 pA/√Hz) and low distortion (120 dBc at

文件：478.07 Kbytes 頁數：24 Pages

AD

亞德諾