AD7021中文資料亞德諾數(shù)據(jù)手冊PDF規(guī)格書

GENERAL DESCRIPTION

The ADF7021 is a high performance, low power, highly integrated 2FSK/3FSK/4FSK transceiver. It is designed to operate in the narrow-band, license-free ISM bands, and in the licensed bands with frequency ranges of 80 MHz to 650 MHz and 862 MHz to 950 MHz. The part has both Gaussian and raised cosine transmit data filtering options to improve spectral efficiency for narrow band applications. It is suitable for circuit applications targeted at European ETSI EN 300 220, the Japanese ARIB STD-T67, the Chinese short range device regulations, and the North American FCC Part 15, Part 90, and Part 95 regulatory standards. A complete transceiver can be built using a small number of external discrete components, making the ADF7021 very suitable for price sensitive and area sensitive applications.

The range of on-chip FSK modulation and data filtering options allows users greater flexibility in their choice of modulation schemes while meeting tight spectral efficiency requirements. The ADF7021 also supports protocols that dynamically switch between 2FSK/3FSK/4FSK to maximize communication range and data throughput.

The transmit section contains dual voltage controlled oscillators (VCOs) and a low noise fractional-N PLL with an output resolution of <1 ppm. The ADF7021 has a VCO using an internal LC tank (431 MHz to 475 MHz, 862 MHz to 950 MHz) and a VCO using an external inductor as part of its tank circuit (80 MHz to 650 MHz). The dual VCO design allows dual-band operation where the user can transmit and/or receive at any frequency supported by the internal inductor VCO and can also transmit and/or receive at a particular frequency band supported by the external inductor VCO.

The frequency agile PLL allows the ADF7021 to be used in frequency hopping spread spectrum (FHSS) systems.

Both VCOs operate at twice the fundamental frequency to reduce spurious emissions and frequency pulling problems.

FEATURES

Low power, narrow-band transceiver

Frequency bands using dual VCO

80 MHz to 650 MHz

862 MHz to 950 MHz

Modulation schemes

2FSK, 3FSK, 4FSK, MSK

Spectral shaping

Gaussian and raised cosine filtering

Data rates supported

0.05 kbps to 32.8 kbps

2.3 V to 3.6 V power supply

Programmable output power

?16 dBm to +13 dBm in 63 steps

Automatic PA ramp control

Receiver sensitivity

?130 dBm at 100 bps, 2FSK

?122 dBm at 1 kbps, 2FSK

?113 dBm at 25 kbps, raised cosine 2FSK

Patent pending, on-chip image rejection calibration

On-chip VCO and fractional-N PLL

On-chip, 7-bit ADC and temperature sensor

Fully automatic frequency control loop (AFC)

Digital received signal strength indication (RSSI)

Integrated Tx/Rx switch

0.1 μA leakage current in power-down mode

APPLICATIONS

Narrow-band standards

ETSI EN 300 220, FCC Part 15, FCC Part 90, FCC Part 95,

ARIB STD-T67

Low cost, wireless data transfer

Remote control/security systems

Wireless metering

Private mobile radio

Wireless medical telemetry service (WMTS)

Keyless entry

Home automation

Process and building control

Pagers