Loop-Powered 4.20 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：496.9 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4??0 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：462.4 Kbytes 頁數：12 Pages

AD

亞德諾

環路供電4-20 mA傳感器發射機

AD693是一款單芯片信號調理電路，可從各種傳感器接受低電平輸入來控制標準4-20 mA雙線電流環路。它提供片內基準電壓源和輔助放大器進行傳感器激勵；當器件以環路供電模式工作時，激勵電流最高可達3.5 mA?；蛘撸?dāng)需要0-20 mA電源時，器件可通過本地供電實現三線應用。\n\n通過簡單的引腳綁定，可設置預先校準的30 mV和60 mV輸入范圍。還可添加外部電阻，實現從1 mV至100 mV的其他范圍。輔助放大器可結合片內電壓，為100Ω RTD提供六種預先校準范圍。還可通過引腳綁定確定輸出范圍和零輸出，從而獲得標準范圍：4-20mA、12 ± 8 mA和0-20 mA。 \n\n對AD69 ? 儀表放大器前端 \n\n? 環路供電電源 \n\n? 可獨立調整的輸出范圍和零輸出 \n\n? 預先校準的輸出范圍:\n4-20 mA單極性\n0-20 mA單極性\n12 ± 8mA雙極性\n\n? 預先校準的20 mV或60mV輸入范圍 \n\n? 預先校準的100 O RTD接口\n\n? 6.2 V 基準電壓源，可提供高達3.5 mA的電流 \n\n? 非專用輔助放大器，提供更高靈活性\n\n? 可選的外部調整管，可減少自熱誤差;

ADI

亞德諾

Loop-Powered 4??0 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：462.4 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4.20 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：496.9 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4.20 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：496.9 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4??0 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：462.4 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4??0 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：462.4 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4.20 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：496.9 Kbytes 頁數：12 Pages

AD

亞德諾

Loop-Powered 4??0 mA Sensor Transmitter

PRODUCT DESCRIPTION The AD693 is a monolithic signal conditioning circuit which accepts low-level inputs from a variety of transducers to control a standard 4–20 mA, two-wire current loop. An on-chip voltage reference and auxiliary amplifier are provided for transducer excitation; up to 3.5 mA of

文件：462.4 Kbytes 頁數：12 Pages

AD

亞德諾