Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾

Low Noise, 90 MHz Variable Gain Amplifier

文件：551.51 Kbytes 頁數：24 Pages

AD

亞德諾

Low Noise, 90 MHz Variable Gain Amplifier

文件：605.25 Kbytes 頁數：20 Pages

AD

亞德諾

Low Noise, 90 MHz Variable Gain Amplifier

文件：815.4 Kbytes 頁數：25 Pages

AD

亞德諾

低噪聲、90 MHz可變?cè)鲆娣糯笃?/p>

AD603是一款低噪聲、電壓控制型放大器，用于射頻(RF)和中頻(IF)自動增益控制(AGC)系統。它提供精確的引腳可選增益，90 MHz帶寬時增益范圍為?11 dB至+31 dB，9 MHz帶寬時增益范圍為+9 dB至+51 dB。用一個外部電阻便可獲得任何中間增益范圍。折合到輸入的噪聲譜密度僅為1.3 nV/√Hz，采用推薦的±5 V電源時功耗為125 mW。 \n\n 增益以dB為線性，經過精密校準，而且不隨溫度和電源電壓而變化。增益由高阻抗(50 MΩ)、低偏置(200 nA)差分輸入控制；比例因子為25 mV/dB，因此僅需要1 V的增益控制電壓就能覆蓋增益范圍的中間40 ? 線性dB增益控制 \n\n? 引腳可編程增益范圍\n?11 dB至+31 dB(90 MHz帶寬) \n9 dB至51 dB(9 MHz帶寬)\n\n? 所有中間范圍(例如?1 dB至+41 dB，帶寬：30 MHz)\n\n? 帶寬與可變?cè)鲆鏌o(wú)關\n\n? 輸入噪聲譜密度：1.3 nV/√Hz\n\n? 增益精度：±0.5 dB(典型值);

ADI

亞德諾

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾

Low Noise, 90 MHz Variable-Gain Amplifier

GENERAL DESCRIPTION The AD603 is a low noise, voltage-controlled amplifier for use in RF and IF AGC systems. It provides accurate, pin-selectable gains of ?11 dB to +31 dB with a bandwidth of 90 MHz or +9 dB to 51+ dB with a bandwidth of 9 MHz. Any intermediate gain range may be arranged using on

文件：219.5 Kbytes 頁數：14 Pages

AD

亞德諾