Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermo couple input to derive an intern

文件：778.64 Kbytes 頁數：8 Pages

AD

亞德諾

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

文件：202.41 Kbytes 頁數：8 Pages

AD

亞德諾

配合K型熱電偶使用的熱電偶調節器和設定點控制器

AD596/AD597是一款單芯片溫度設定點控制器，專門針對高溫環境（如烤箱控制引用中的）進行了優化。該器件可對J或K型熱電偶輸入進行冷結補償和放大，從而得出與溫度成比例的內部信號。接著，該器件將內部信號與外部施加的設定點電壓相比較，從而產生低阻抗開關輸出電壓。死區或開關遲滯可使用單個外部電阻進行編程。或者，AD596/ AD597可配置成直接采用J或K型熱電偶信號提供電壓輸出(10 mV/°C)。也可用作獨立的電壓輸出溫度傳感器。\nAD596/AD597可采用+5 V至+30 V的單電源或總范圍最高至36 V的雙電源供電。典型靜態電源電流為160 μA，此時自熱誤差降至最低。\n?AD59 ? 采用J型(AD596)或K型(AD597)熱電偶工作 \n? 內置冰點補償 \n? 溫度比例工作模式：10 mV/°C \n? 低成本 \n? 溫度設定點工作模式：開/關 \n? 可編程的開關遲滯 \n? 高阻抗差分輸入 ;

ADI

亞德諾

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

文件：202.41 Kbytes 頁數：8 Pages

AD

亞德諾

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermo couple input to derive an intern

文件：778.64 Kbytes 頁數：8 Pages

AD

亞德諾

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermocouple input to derive an internal

文件：202.41 Kbytes 頁數：8 Pages

AD

亞德諾

Thermocouple Conditioner and Setpoint Controller

GENERAL DESCRIPTION The AD596/AD597 is a monolithic temperature setpoint controller that has been optimized for use at elevated temperatures such as those found in oven control applications. The device cold junction compensates and amplifies a type J or K thermo couple input to derive an intern

文件：778.64 Kbytes 頁數：8 Pages

AD

亞德諾

THERMOCOUPLE CONDITIONER AND SETPOINT CONTROLLER

文件：778.64 Kbytes 頁數：8 Pages

AD

亞德諾

Package：TO-100-10 金屬罐；包裝：管件 功能：熱電偶調節器 類別：集成電路（IC） 熱管理 描述：IC THERMOCOUPLE COND TO-100-10

AD

亞德諾

Package：8-SOIC（0.154"，3.90mm 寬）；包裝：卷帶（TR）剪切帶（CT）Digi-Reel? 得捷定制卷帶 功能：熱電偶調節器 類別：集成電路（IC） 熱管理 描述：IC THERMOCOUPLE COND 8-SOIC

AD

亞德諾