Dual Full-Bridge PWM Motor Driver

The A3968SA and A3968SLB are designed to bidirectionally control two dc motors. Each device includes two H-bridges capable of continuous output currents of ±650 mA and operating voltages to 30 V. Motor winding current can be controlled by the internal fixed-frequency, pulse-width modulated (PWM),

文件：268.95 Kbytes 頁數：8 Pages

ALLEGRO

DUAL FULL-BRIDGE PWM MOTOR DRIVER WITH BRAKE

FEATURES ■ ±650 mA Continuous Output Current ■ 30 V Output Voltage Rating ■ Internal Fixed-Frequency PWM Current Control ■ Satlington Sink Drivers ■ Brake Mode ■ User-Selectable Blanking Window ■ Internal Ground-Clamp & Flyback Diodes ■ Internal Thermal-Shutdown Circuitry ■ Crossover-Curr

文件：265.21 Kbytes 頁數：10 Pages

ALLEGRO

Dual Full-Bridge PWM Motor Driver

Description The A3969 is designed to drive both windings of a two-phase bipolar stepper motor. The device includes two H-bridges capable of continuous output currents of ±650 mA and op er at ing voltages to 30 V. Motor winding current can be controlled by the internal fixed-fre quen cy, pulse-wid

文件：363.49 Kbytes 頁數：9 Pages

ALLEGRO

Dual Full-Bridge PWM Motor Driver

Description The A3969 is designed to drive both windings of a two-phase bipolar stepper motor. The device includes two H-bridges capable of continuous output currents of ±650 mA and op er at ing voltages to 30 V. Motor winding current can be controlled by the internal fixed-fre quen cy, pulse-wid

文件：363.49 Kbytes 頁數：9 Pages

ALLEGRO

Dual Full-Bridge PWM Motor Driver

Description The A3969 is designed to drive both windings of a two-phase bipolar stepper motor. The device includes two H-bridges capable of continuous output currents of ±650 mA and op er at ing voltages to 30 V. Motor winding current can be controlled by the internal fixed-fre quen cy, pulse-wid

文件：363.49 Kbytes 頁數：9 Pages

ALLEGRO

DUAL DMOS FULL-BRIDGE DRIVER

Designed to interface between external PWM control logic and inductive loads such as relays, solenoids, dc motors, or stepper motors, each full bridge can operate with output currents to ±2.5 A and operating voltages to 50 V. Low rDS(on) DMOS output drivers provide low power dissipation during PW

文件：141.47 Kbytes 頁數：8 Pages

ALLEGRO

DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER

DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER Designed for pulse-width modulated (PWM) current control of bipolar microstepping stepper motors, the A3972SB is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing

文件：190.76 Kbytes 頁數：12 Pages

ALLEGRO

Dual DMOS Full-Bridge Microstepping PWM Motor Driver

Description Designed for pulse-width modulated (PWM) current control of bipolar microstepping stepper motors, the A3972 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing circuitry can be programmed via a serial

文件：312.98 Kbytes 頁數：10 Pages

ALLEGRO

DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER

DUAL DMOS FULL-BRIDGE MICROSTEPPING PWM MOTOR DRIVER Designed for pulse-width modulated (PWM) current control of bipolar microstepping stepper motors, the A3972SB is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing

文件：190.76 Kbytes 頁數：12 Pages

ALLEGRO

Dual DMOS Full-Bridge Microstepping PWM Motor Driver

Description Designed for pulse-width modulated (PWM) current control of bipolar microstepping stepper motors, the A3972 is capable of continuous output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing circuitry can be programmed via a serial

文件：282.84 Kbytes 頁數：11 Pages

ALLEGRO