Inline flowmeter for continuous measurements

The paddle wheel flowmeter Type 8030/8030-HT is especially designed for use with neutral, slightly aggressive, solid free liquids. The device is made up of a compact Inline sensor-fitting (Type S030/S030?HT) and a transmitter (Type SE30/SE30?HT). The device is quickly and easily assembled than

文件：825.52 Kbytes 頁數：14 Pages

BURKERT

寶帝流體控制系統

Direct acting 2-way basic proportional valve

Type 2863 is an extremely compact solenoid control valve and is available with an orifice up to 4 mm. It is based on the standard version of Type 2873. It is used as an actuator in closed control loops (pressure, flow, temperature, etc.). Compared with the standard version, the valve is essenti

文件：1.25736 Mbytes 頁數：13 Pages

BURKERT

寶帝流體控制系統

Direct-acting 2-way Solenoid Control Valve

The direct-acting proportional valve Type 2836 works as an electromagnetically actuated control valve in applications with relatively highflow rates. The valve is normally closed. Type description

文件：973.01 Kbytes 頁數：10 Pages

BURKERT

寶帝流體控制系統

Flowmeter with paddle wheel for continuous flow measure-ment

The paddle wheel flow meter is available in magnetic or optical variant. The magnetic variant of the measuring instrument is especially designed for use with neutral, slightly aggressive, solid free liquids. The optical variant is exclusively intended for use with infrared transparent liquids.

文件：1.50581 Mbytes 頁數：21 Pages

BURKERT

寶帝流體控制系統

Insertion flowmeter with paddle wheel for continuous flow measurement

The paddle wheel flowmeter for continuous flow measurement is especially designed for use in neutral, slightly aggressive, solid free liquids. The Bürkert designed fitting system ensures simple installation of the devices into all pipes from DN 20…DN 400. The flowmeter produces a frequency puls

文件：777.28 Kbytes 頁數：11 Pages

BURKERT

寶帝流體控制系統

Insertion flowmeter/batch controller with paddle wheel and flow transmitter/remote batch controller

The Type 8025 device is specially designed for use in neutral or slightly aggressive, solid-free liquids. The device is provided as flowmeter or batch controller in a compact variant with paddle-wheel sensor or in a remote variant. The Bürkert-designed fitting system ensures simple installation

文件：1.54833 Mbytes 頁數：39 Pages

BURKERT

寶帝流體控制系統

Inline flowmeter with paddle wheel, ELEMENT design

The paddle wheel device Type 8036 is specially designed for measuring the flow rate in solid-free liquids in a variety of applications (water, waste water monitoring, chemical processing, etc.). The device is made up of a compact sensor-fitting with paddle wheel (Type S030) and a transmitter (

文件：933.97 Kbytes 頁數：12 Pages

BURKERT

寶帝流體控制系統

Flowmeter for gases

This flowmeter series is made for the measurement of especially large flow rates and use the calorimetric measuring principle. A heated sensor element is cooled down by the gas flow. This cooling effect which depends on the flow velocity and the gas characteristics serves as a flow indication,

文件：962.12 Kbytes 頁數：10 Pages

BURKERT

寶帝流體控制系統

Radar level meter for liquids suitable for use in applications with aggressive fluids as well as with hygienic requirements

The Type 8139 is a non-contact radar level measuring device for continuous level measurement. It is available with: ? integrated antenna (G- or NPT connection), especially suitable for level measurement of aggressive liquids, with special advantages for small vessels. ? plastic horn antenna

文件：1.84514 Mbytes 頁數：19 Pages

BURKERT

寶帝流體控制系統

Ultrasonic level measuring device

The type 8177 is a non-contact ultrasonic level measuring device, designed for continuous level measurement in open or closed vessels. The unit is suitable for liquids, but also for solids, in virtually all industries, particularly in water and waste water management. Type description

文件：702.7 Kbytes 頁數：9 Pages

BURKERT

寶帝流體控制系統