4-bit D-type Register (with 3-state Outputs)

Description The four D type Flip-Flops operate synchronously from a common clock. The 3-state outputs allow the device to be used in bus organized systems. The outputs are placed in the 3-stage mode when either of the output disable pins are in the logic high level. The input disable allows the

文件：56.75 Kbytes 頁數：9 Pages

HITACHIHitachi Semiconductor

日立日立公司

Quad D-type flip-flop; positive-edge trigger; 3-state

GENERAL DESCRIPTION The 74HC/HCT173 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT173 are 4-bit parallel load registers with clock enable control, 3-state buffered outputs (

文件：69.04 Kbytes 頁數：10 Pages

PHI

PHI

4-bit D-type Register (with 3-state Outputs)

Description\nThe four D type Flip-Flops operate synchronously from a common clock. The 3-state outputs allow the device to be used in bus organized systems. The outputs are placed in the 3-stage mode when either of the output disable pins are in the logic high level.\nThe input disable allows the fl ? High Speed Operation: tpd (Clock to Q) = 14 ns typ (CL = 50 pF)\n? High Output Current: Fanout of 10 LSTTL Loads\n? Wide Operating Voltage: VCC = 2 to 6 V\n? Low Input Current: 1 μA max\n? Low Quiescent Supply Current: ICC (static) = 4 μA max (Ta = 25°C);

HITACHI

日立

TRI-STATE Quad Registers

文件：131.38 Kbytes 頁數：6 Pages

NSC

國半

TTL HD74/HD74S Series

文件：143.51 Kbytes 頁數：4 Pages

HITACHIHitachi Semiconductor

日立日立公司

4-BIT D-TYPE REGISTERS WITH 3-STATE OUTPUTS

文件：562.82 Kbytes 頁數：19 Pages

TI

德州儀器