Solenoids with Kick and Drop

The Kick and Drop variants of the AC10 and AC19 coil types use two windings in one solenoid. Thanks to an increased inrush power for the first winding, the switchable pressure range is increased as installation volumes stay the same. The second winding is switched in series after 500 ms. Thanks

文件：1.17689 Mbytes 頁數：17 Pages

BURKERT

寶帝流體控制系統

Mass Flow Controller for Gases (MFC)

The mass flow controller (MFC) type 8713 is suited for regulating the mass flow of gases over a big flow range. The thermal MEMS sensor is located directly in the gas stream and therefore reaches very fast response times. A direct-acting proportional valve from Bürkert guarantees a high sensiti

文件：1.15705 Mbytes 頁數：13 Pages

BURKERT

寶帝流體控制系統

Mass flow controller (MFC)/mass flow meter (MFM) for gases

The Type 8741 mass flow controller (MFC)/mass flow meter (MFM) for gases is suitable for a variety of applications and is available with Industrial Ethernet, analogue or fieldbus interfaces. The variant with CANopen-based Bürkert Systembus (büS) is suitable for integration into existing CANopen

文件：4.13402 Mbytes 頁數：24 Pages

BURKERT

寶帝流體控制系統

Mass Flow Controller for Gases (MFC)

The mass flow controller (MFC) Type 8711 is suited for regulating the mass flow of gases over a big flow range. The thermal MEMS sensor is located directly in the gas stream and therefore reaches very fast response times. A direct-acting proportional valve from Bürkert guarantees a high sensiti

文件：1.35976 Mbytes 頁數：15 Pages

BURKERT

寶帝流體控制系統

Mass Flow Controller (MFC)/ Mass Flow Meter (MFM) for gases

The Mass Flow Controller (MFC) / Mass Flow Meter (MFM) Type 8742 for gases is suitable for a wide range of applications, e.g. metal and glass manufacturing or processing, fermentation processes, test benches or filling systems and packaging machines. Type 8742 is available in two variants: The

文件：3.99499 Mbytes 頁數：28 Pages

BURKERT

寶帝流體控制系統

Mass flow controller (MFC) / Mass flow meter (MFM) for gases

The mass flow controller (MFC) / mass flow meter (MFM) Type 8746 for gases is suitable for a wide range of applications, e.g. metal and glass manufacturing or processing, fermentation processes, test benches or filling systems and packaging machines. Type 8746 is available in two variants: A va

文件：7.32793 Mbytes 頁數：38 Pages

BURKERT

寶帝流體控制系統

Mass Flow Meter (MFM) for Gases

The mass flow meter (MFM) type 8703 is suited for measuring the mass flow of gases over a big flow range. The thermal MEMS sensor is located directly in the gas stream and therefore reaches very fast response times. Type 8703 can optionally be calibrated for two different gases; the user can sw

文件：1.07856 Mbytes 頁數：12 Pages

BURKERT

寶帝流體控制系統

Mass flow controller (MFC)/mass flow meter (MFM) for gases

The mass flow controller (MFC)/mass flow meter (MFM) Type 8745 is suitable for mass flow control of high flow rates. Type 8745 can be configured as MFM or MFC. Optionally, four different gases can be calibrated. The thermal inline sensor is located directly in the main gas stream and therefore

文件：3.83473 Mbytes 頁數：26 Pages

BURKERT

寶帝流體控制系統

Mass Dosing Controller (MDC) for liquids

The mass dosing controller (MDC) Type 8756 is especially suitable for dosing small quantities of liquids with the highest accuracy. The measuring principle is based on the Coriolis effect and is completely independent of the medium. Pressure and temperature deviations have no influence on the d

文件：1.66599 Mbytes 頁數：21 Pages

BURKERT

寶帝流體控制系統

Mass Flow Controller for Gases (MFC)

The mass flow controller (MFC) Type 8710 is especially suited for regulating the mass flow of aggressive gases, which need a sensor which is not in direct contact with the gas. The thermal capillary sensor reaches fast response times. A direct-acting proportional valve from Bürkert guarantees a

文件：1.19645 Mbytes 頁數：14 Pages

BURKERT

寶帝流體控制系統